Ns3 构建哑铃型拓扑,并实现两个点的TCP连接(详细请戳全文)
时间: 2024-03-31 22:38:44 浏览: 20
好的,我了解你的问题了。让我来为你解答。
首先,Ns3是一款用于网络仿真的开源软件,它可以通过模拟网络拓扑结构、协议栈、路由机制等方面的行为,来验证网络设计的正确性和性能。而“哑铃型拓扑”是一种常见的网络拓扑结构,它由两个环形网络通过一条“瓶颈”链路连接而成,形状类似于哑铃。
接下来,让我为你介绍如何使用Ns3构建哑铃型拓扑,并实现两个点的TCP连接。
1. 安装Ns3
首先,你需要安装Ns3。可以通过官网下载安装包,或者通过包管理器安装。这里以Ubuntu为例,使用包管理器进行安装:
```
sudo apt-get install ns3
```
2. 构建哑铃型拓扑
构建哑铃型拓扑需要编写一个C++脚本。以下是一个简单的示例:
```c++
#include "ns3/core-module.h"
#include "ns3/network-module.h"
#include "ns3/internet-module.h"
#include "ns3/csma-module.h"
#include "ns3/applications-module.h"
using namespace ns3;
NS_LOG_COMPONENT_DEFINE ("DumbbellExample");
int main (int argc, char *argv[])
{
bool verbose = true;
uint32_t nCsma = 3;
CommandLine cmd;
cmd.AddValue ("nCsma", "Number of \"extra\" CSMA nodes/devices", nCsma);
cmd.AddValue ("verbose", "Tell echo applications to log if true", verbose);
cmd.Parse (argc, argv);
if (verbose)
{
LogComponentEnable ("UdpEchoClientApplication", LOG_LEVEL_INFO);
LogComponentEnable ("UdpEchoServerApplication", LOG_LEVEL_INFO);
}
NodeContainer p2pNodes;
p2pNodes.Create (2);
NodeContainer csmaNodes;
csmaNodes.Add (p2pNodes.Get (1));
csmaNodes.Create (nCsma);
csmaNodes.Add (p2pNodes.Get (0));
PointToPointHelper pointToPoint;
pointToPoint.SetDeviceAttribute ("DataRate", StringValue ("5Mbps"));
pointToPoint.SetChannelAttribute ("Delay", StringValue ("2ms"));
NetDeviceContainer p2pDevices;
p2pDevices = pointToPoint.Install (p2pNodes);
CsmaHelper csma;
csma.SetChannelAttribute ("DataRate", StringValue ("100Mbps"));
csma.SetChannelAttribute ("Delay", TimeValue (NanoSeconds (6560)));
NetDeviceContainer csmaDevices;
csmaDevices = csma.Install (csmaNodes);
InternetStackHelper stack;
stack.Install (p2pNodes.Get (0));
stack.Install (csmaNodes);
stack.Install (p2pNodes.Get (1));
Ipv4AddressHelper address;
address.SetBase ("10.1.1.0", "255.255.255.252");
Ipv4InterfaceContainer p2pInterfaces;
p2pInterfaces = address.Assign (p2pDevices);
address.SetBase ("10.1.2.0", "255.255.255.0");
Ipv4InterfaceContainer csmaInterfaces;
csmaInterfaces = address.Assign (csmaDevices);
UdpEchoServerHelper echoServer (9);
ApplicationContainer serverApps = echoServer.Install (csmaNodes.Get (nCsma));
serverApps.Start (Seconds (1.0));
serverApps.Stop (Seconds (10.0));
UdpEchoClientHelper echoClient (csmaInterfaces.GetAddress (nCsma), 9);
echoClient.SetAttribute ("MaxPackets", UintegerValue (1));
echoClient.SetAttribute ("Interval", TimeValue (Seconds (1.0)));
echoClient.SetAttribute ("PacketSize", UintegerValue (1024));
ApplicationContainer clientApps = echoClient.Install (p2pNodes.Get (0));
clientApps.Start (Seconds (2.0));
clientApps.Stop (Seconds (10.0));
Simulator::Run ();
Simulator::Destroy ();
return 0;
}
```
上述代码中,首先定义了一些变量,包括是否开启详细日志输出、CSMA节点的数量等。然后定义了两个节点容器,分别表示哑铃型拓扑的两个端点。接着,使用PointToPointHelper和CsmaHelper分别创建了两个网络连接,即瓶颈链路和环形网络。使用InternetStackHelper将协议栈安装在节点上,并使用Ipv4AddressHelper为每个节点分配IP地址。最后,使用UdpEchoServerHelper和UdpEchoClientHelper创建了一个简单的UDP回显应用程序,并将其安装在哑铃型拓扑的两个端点上,以实现两个点的TCP连接。
3. 运行仿真
将上述代码保存为dumbbell.cc文件,并使用以下命令编译和运行:
```
./waf --run "dumbbell --nCsma=3"
```
其中“--nCsma=3”表示CSMA节点的数量为3。运行后,Ns3将会自动构建哑铃型拓扑,并在终端输出仿真结果。
以上就是使用Ns3构建哑铃型拓扑,并实现两个点的TCP连接的方法。希望对你有所帮助!