写一个stm32超声波测距代码

以下是一个基本的stm32超声波测距代码示例：

#include "stm32f10x.h"

#define TRIG_PIN GPIO_Pin_0
#define ECHO_PIN GPIO_Pin_1
#define TRIG_PORT GPIOA
#define ECHO_PORT GPIOA

void delay_us(uint32_t us)
{
    uint32_t count = us * (SystemCoreClock / 1000000) / 5;
    while(count--);
}

int main(void)
{
    GPIO_InitTypeDef GPIO_InitStructure;
    TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
    TIM_OCInitTypeDef TIM_OCInitStructure;
    uint32_t distance = 0;

    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);

    GPIO_InitStructure.GPIO_Pin = TRIG_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(TRIG_PORT, &GPIO_InitStructure);

    GPIO_InitStructure.GPIO_Pin = ECHO_PIN;
    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(ECHO_PORT, &GPIO_InitStructure);

    TIM_TimeBaseStructure.TIM_Period = 65535;
    TIM_TimeBaseStructure.TIM_Prescaler = (SystemCoreClock / 1000000) - 1;
    TIM_TimeBaseStructure.TIM_ClockDivision = 0;
    TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
    TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);

    TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM1;
    TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable;
    TIM_OCInitStructure.TIM_Pulse = 0;
    TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High;
    TIM_OC1Init(TIM2, &TIM_OCInitStructure);

    while(1)
    {
        GPIO_SetBits(TRIG_PORT, TRIG_PIN);
        delay_us(10);
        GPIO_ResetBits(TRIG_PORT, TRIG_PIN);

        while(GPIO_ReadInputDataBit(ECHO_PORT, ECHO_PIN) == RESET);

        TIM_SetCounter(TIM2, 0);
        while(GPIO_ReadInputDataBit(ECHO_PORT, ECHO_PIN) == SET);
        distance = TIM_GetCounter(TIM2) * 17 / 1000;

        // do something with distance
    }
}

这个代码使用了定时器2来测量超声波回波的时间，然后计算出距离。在主循环中，它不断地发送超声波信号并接收回波，然后计算距离并进行一些操作。