编写Arduino程序,使用esp32s3实现蓝牙键盘
时间: 2024-03-03 19:50:22 浏览: 30
为了使用ESP32S3实现蓝牙键盘,您需要安装ESP-IDF工具链和Arduino IDE,然后根据以下步骤进行操作:
1. 在Arduino IDE中安装ESP32S3板支持库。在Arduino IDE中选择“工具”>“开发板”>“开发板管理器”,然后搜索“ESP32S3”并安装支持库。
2. 创建一个新的Arduino项目并将以下代码复制到Arduino IDE中:
```c++
#include <BLEDevice.h>
#include <BLEHIDDevice.h>
#include <BLEKeyboard.h>
BLEKeyboard* keyboard;
void setup() {
BLEDevice::init("ESP32S3 Keyboard");
BLEServer* server = BLEDevice::createServer();
BLEHIDDevice* hid = new BLEHIDDevice(server);
keyboard = new BLEKeyboard(hid);
hid->manufacturer()->setValue("ESP32S3");
hid->pnp(0x02, 0xe502, 0xa111, 0x0210);
hid->hidInfo(0x00,0x01);
hid->reportMap((uint8_t*)HID_REPORT_MAP, sizeof(HID_REPORT_MAP));
hid->startServices();
BLEAdvertising* advertising = BLEDevice::getAdvertising();
advertising->setAppearance(HID_KEYBOARD);
advertising->setDeviceName("ESP32S3 Keyboard");
advertising->addServiceUUID(hid->hidService()->getUUID());
advertising->start();
}
void loop() {
// Add your code here
}
```
3. 将以下HID报告映射复制到Arduino项目中:
```c++
const uint8_t HID_REPORT_MAP[] = {
0x05, 0x01, // Usage Page (Generic Desktop)
0x09, 0x06, // Usage (Keyboard)
0xA1, 0x01, // Collection (Application)
0x05, 0x07, // Usage Page (Key Codes)
0x19, 0xE0, // Usage Minimum (224)
0x29, 0xE7, // Usage Maximum (231)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x08, // Report Count (8)
0x81, 0x02, // Input (Data, Variable, Absolute) ;Modifier byte
0x95, 0x01, // Report Count (1)
0x75, 0x08, // Report Size (8)
0x81, 0x01, // Input (Constant) ;Reserved byte
0x95, 0x06, // Report Count (6)
0x75, 0x08, // Report Size (8)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x65, // Logical Maximum (101)
0x05, 0x07, // Usage Page (Key Codes)
0x19, 0x00, // Usage Minimum (0)
0x29, 0x65, // Usage Maximum (101)
0x81, 0x00, // Input (Data, Array) ;Key arrays (6 bytes)
0xC0 // End Collection
};
```
4. 编译并上传程序到ESP32S3板。连接ESP32S3板到计算机上,并在Arduino IDE中选择正确的串口和开发板。然后点击“上传”按钮来编译并上传程序到ESP32S3板。
5. 现在您可以打开蓝牙设备列表并搜索“ESP32S3 Keyboard”。连接到设备后,您可以开始使用ESP32S3作为蓝牙键盘。
注意:此代码仅支持模拟美国英语键盘布局,如果需要其他键盘布局,请修改HID报告映射中的相应值。