C语言设置调试串口参数
时间: 2023-03-30 08:02:32 浏览: 79
为了设置调试串口的参数,您可以使用 `tcgetattr` 和 `tcsetattr` 函数来获取和设置串口的参数。
设置串口的波特率,可以使用 `cfsetispeed` 和 `cfsetospeed` 函数。
例如,下面的代码展示了如何设置串口的波特率为 115200 bps:
```
#include <termios.h>
int main(void)
{
int fd;
struct termios tty;
// 使用 open 函数打开串口
fd = open("/dev/ttyUSB0", O_RDWR | O_NOCTTY | O_NDELAY);
if (fd == -1) {
perror("Unable to open serial port");
return -1;
}
// 使用 tcgetattr 函数获取串口的当前参数
if (tcgetattr(fd, &tty) != 0) {
perror("Error from tcgetattr");
return -1;
}
// 使用 cfsetispeed 和 cfsetospeed 设置波特率
cfsetispeed(&tty, B115200);
cfsetospeed(&tty, B115200);
// 使用 tcsetattr 函数设置串口的新参数
if (tcsetattr(fd, TCSANOW, &tty) != 0) {
perror("Error from tcsetattr");
return -1;
}
// 在这里使用串口
// 使用 close 函数关闭串口
close(fd);
return 0;
}
```
注意,您需要在程序的开头包含 `termios.h` 头文件,并使用 `O_RDWR`、`O_NOCTTY` 和 `O_NDELAY` 常量打开串口。
此外,您还需要注意,在设置串口的参数之前,需要先获取当前的参数,然后再修改需要改变的参数,最后再使用 `