bluez设置允许其他蓝牙连接
时间: 2023-09-20 22:06:24 浏览: 50
要设置允许其他蓝牙设备连接,请按照以下步骤进行操作:
1. 打开终端并输入以下命令以编辑Bluetooth配置文件:
```
sudo nano /etc/bluetooth/main.conf
```
2. 找到以下行:
```
#AutoEnable=false
```
3. 将其更改为:
```
AutoEnable=true
```
4. 按下CTRL + X,然后按下Y以保存更改。
5. 重启Bluetooth服务:
```
sudo service bluetooth restart
```
现在,您的系统应该已经允许其他蓝牙设备连接。
相关问题
bluez c语言蓝牙扫描连接程序
下面是一个简单的使用BlueZ库进行蓝牙扫描和连接的C语言程序示例:
```c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/socket.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/hci.h>
#include <bluetooth/hci_lib.h>
int main(int argc, char **argv) {
inquiry_info *devices = NULL;
int max_devices = 5;
int num_devices = 0;
int dev_id, sock, len, i;
char addr[19] = { 0 };
char name[248] = { 0 };
// 获取第一个可用的蓝牙适配器的ID
dev_id = hci_get_route(NULL);
if (dev_id < 0) {
perror("hci_get_route");
exit(1);
}
// 打开蓝牙适配器
sock = hci_open_dev(dev_id);
if (sock < 0) {
perror("hci_open_dev");
exit(1);
}
// 开始扫描蓝牙设备
len = 8;
max_devices = max_devices < 1 ? 1 : max_devices;
devices = (inquiry_info*)malloc(max_devices * sizeof(inquiry_info));
num_devices = hci_inquiry(dev_id, len, max_devices, NULL, &devices, IREQ_CACHE_FLUSH);
// 输出扫描到的设备信息
for (i = 0; i < num_devices; i++) {
ba2str(&(devices+i)->bdaddr, addr);
memset(name, 0, sizeof(name));
if (hci_read_remote_name(sock, &(devices+i)->bdaddr, sizeof(name), name, 0) < 0) {
strcpy(name, "[unknown]");
}
printf("%s %s\n", addr, name);
}
// 连接到指定的蓝牙设备
bdaddr_t target;
str2ba("00:11:22:33:44:55", &target);
int status = hci_create_connection(sock, &target, HCI_ROLE_MASTER, 0);
if (status < 0) {
perror("hci_create_connection");
exit(1);
}
// 关闭蓝牙适配器
free(devices);
close(sock);
return 0;
}
```
这个程序会扫描附近的蓝牙设备并输出它们的MAC地址和名称,然后连接到指定的蓝牙设备(这里是一个虚拟的MAC地址)。注意,你需要在运行程序前确保你的蓝牙适配器已经打开并且正常工作。
bluez命令设置蓝牙可被扫描
要设置蓝牙可被扫描,可以使用以下的bluez命令:
```
sudo hciconfig hci0 piscan
```
这个命令将hci0设备设置为可被扫描模式。如果你的蓝牙设备名称不是hci0,你需要将命令中的hci0替换为你的设备名称。
另外,如果你想要在Linux系统中通过蓝牙管理器来设置蓝牙可被扫描,可以按照以下步骤:
1. 打开蓝牙管理器,例如BlueMan或者Blueman-manager。
2. 在设备列表中找到你的蓝牙设备,右键点击并选择“Properties”(属性)。
3. 在设备属性中,选择“Adapter”(适配器)选项卡。
4. 在“Visibility”(可见性)部分,选择“Visible”(可见)选项。
5. 点击“Apply”(应用)按钮保存设置。
这样,你的蓝牙设备将会被设置为可被扫描状态。