msgs[0].flags =0,为什么是写
时间: 2023-05-21 15:07:23 浏览: 77
在编程中,当定义一个变量时,赋初值是一个好习惯,这有助于程序更加健壮和可靠。在这个问题中,msgs[0].flags = 0 是将 flags 变量的值初始化为 0。这个具体变量的作用在上下文中无法确定,需要更多的信息才能给出更准确的答案。
相关问题
regmap() 通过SMBUS协议中 block write-block read process call命令格式读取设备温度 其中写block count为2 读block count为4 command code为0想2 block实例
好的,以下是一个使用regmap()通过SMBUS协议中block write-block read process call命令格式读取设备温度的示例,其中写block count为2,读block count为4,command code为0想2 block:
假设设备地址为0x50,温度寄存器地址为0x10,温度寄存器格式为16位有符号整数。
```
// 初始化regmap
struct device *dev;
struct regmap *map;
struct i2c_client *client;
dev = &client->dev;
map = devm_regmap_init_i2c(client, &my_regmap_config);
// 构造写block
u8 cmd_write[] = { 0x10, 0x00 };
struct i2c_msg msgs_write[] = {
{
.addr = client->addr,
.flags = 0,
.len = sizeof(cmd_write),
.buf = cmd_write,
}
};
// 构造读block
u8 buf[4];
struct i2c_msg msgs_read[] = {
{
.addr = client->addr,
.flags = I2C_M_RD,
.len = sizeof(buf),
.buf = buf,
}
};
// 发送block write-block read process call命令
struct i2c_rdwr_ioctl_data rdwr = {
.msgs = msgs_write,
.nmsgs = ARRAY_SIZE(msgs_write),
};
int ret = ioctl(client->adapter->dev.parent->fd, I2C_RDWR, &rdwr);
if (ret < 0) {
// 错误处理
}
rdwr.msgs = msgs_read;
rdwr.nmsgs = ARRAY_SIZE(msgs_read);
ret = ioctl(client->adapter->dev.parent->fd, I2C_RDWR, &rdwr);
if (ret < 0) {
// 错误处理
}
// 解析温度
int16_t temperature = (buf[2] << 8) | buf[3];
```
在上面的示例中,使用了ioctl()函数向设备发送block write-block read process call命令,其中写block count为2,读block count为4,command code为0想2 block。需要注意的是,在构造写block和读block时,需要保证写block和读block的长度和设备协议一致。另外,读取到的温度值需要根据设备的温度寄存器格式进行转换。
I2C_RDWR是什么指令
I2C_RDWR是用于I2C总线通信的ioctl指令之一。I2C(Inter-Integrated Circuit)是一种串行通信协议,用于在集成电路之间进行短距离通信。
I2C_RDWR指令用于在Linux系统中通过I2C总线进行读写操作。它允许用户空间程序与I2C设备进行通信,发送读写命令和数据,并接收设备的响应。
使用该指令时,需要传递一个i2c_rdwr_ioctl_data结构体作为参数,该结构体包含了一系列的i2c_msg结构体,每个i2c_msg结构体描述了一个具体的读写操作。
下面是一个使用I2C_RDWR指令进行I2C通信的示例:
```c
#include <stdio.h>
#include <fcntl.h>
#include <linux/i2c-dev.h>
#include <sys/ioctl.h>
int main() {
int fd = open("/dev/i2c-1", O_RDWR); // 打开I2C设备文件
if (fd < 0) {
perror("Failed to open device");
return 1;
}
struct i2c_rdwr_ioctl_data data;
struct i2c_msg messages[2];
// 第一个操作,写入数据
unsigned char write_data[3] = {0x12, 0x34, 0x56};
messages[0].addr = 0x50; // 设备地址
messages[0].flags = 0; // 写操作标志
messages[0].len = sizeof(write_data); // 数据长度
messages[0].buf = write_data; // 数据缓冲区
// 第二个操作,读取数据
unsigned char read_data[2];
messages[1].addr = 0x50; // 设备地址
messages[1].flags = I2C_M_RD; // 读操作标志
messages[1].len = sizeof(read_data); // 数据长度
messages[1].buf = read_data; // 数据缓冲区
data.msgs = messages;
data.nmsgs = 2;
if (ioctl(fd, I2C_RDWR, &data) == -1) { // 调用ioctl函数
perror("ioctl failed");
close(fd);
return 1;
}
// 在这里处理读取到的数据
close(fd);
return 0;
}
```
在上述示例中,我们打开了一个I2C设备文件,并通过I2C_RDWR指令发送了两个操作:第一个操作是写入数据到设备,第二个操作是从设备读取数据。每个操作都使用一个i2c_msg结构体来描述,然后将所有的操作打包在一个i2c_rdwr_ioctl_data结构体中传递给ioctl函数。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)