c语言产生一个梯形波函数代码
时间: 2024-01-20 21:04:33 浏览: 33
以下是一个生成梯形波函数的 C 代码示例:
```c
#include <stdio.h>
int main() {
int t;
for (t = 0; t < 20; t++) {
if (t % 10 < 5) {
printf("%d ", 0);
} else {
printf("%d ", 1);
}
}
return 0;
}
```
该代码使用了一个 for 循环,循环次数为 20。在循环内部,使用了一个 if 语句来判断当前循环次数是否在梯形波的上升段或下降段,然后输出相应的值。可以根据需要修改循环次数和梯形波的上升和下降时间长度。
相关问题
用C语言写一个方波驱动代码
好的,以下是用C语言写一个方波驱动代码的示例:
```c
#include <stdio.h>
#include <stdlib.h>
#include <wiringPi.h>
#define PIN 0 // GPIO 0
int main(void) {
if (wiringPiSetup() == -1) {
printf("Failed to initialize wiringPi.\n");
exit(1);
}
pinMode(PIN, OUTPUT);
while (1) {
digitalWrite(PIN, HIGH);
delay(500);
digitalWrite(PIN, LOW);
delay(500);
}
return 0;
}
```
这个代码使用了wiringPi库来控制GPIO口输出高低电平,从而产生方波信号。在这个示例中,我们使用GPIO 0口作为输出口,每隔500毫秒将它的电平从高变为低,再从低变为高,就可以产生一个频率为1赫兹的方波信号。
C语言产生一个随机数的代码
C语言中产生随机数的函数是rand(),需要先使用srand()函数来初始化随机数种子。下面是一个简单的产生随机数的代码示例:
```c
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
int main() {
int i;
// 初始化随机数种子
srand((unsigned)time(NULL));
// 产生10个随机数
for (i = 0; i < 10; i++) {
printf("%d\n", rand());
}
return 0;
}
```
此代码会随机产生10个整数并输出。注意:每次运行程序都会产生不同的随机数序列。
相关推荐
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)