url地址是https://otaapi-test.lotuscars.com.cn/v50/vehicle/api/register 使用gethostbyname获取host 怎么做
时间: 2023-09-17 18:09:06 浏览: 63
使用gethostbyname函数获取主机名对应的IP地址的步骤如下:
1. 引入头文件`#include <netdb.h>`。
2. 定义一个hostent类型的指针变量`struct hostent *host`。
3. 调用gethostbyname函数,传入主机名的字符串参数,返回一个hostent类型的指针。
```c
host = gethostbyname("otaapi-test.lotuscars.com.cn");
```
4. 如果返回值为NULL,说明主机名解析失败,可以使用herror函数输出错误信息。
5. 如果返回值不为NULL,可以通过hostent结构体中的h_addr_list字段获取IP地址。
```c
struct in_addr **addr_list;
addr_list = (struct in_addr**)host->h_addr_list;
for(int i = 0; addr_list[i] != NULL; i++){
printf("%s\n", inet_ntoa(*addr_list[i]));
}
```
其中inet_ntoa函数可以将一个in_addr类型的结构体转化为字符串形式的IP地址。
相关问题
c语言写一个函数 输入是https://otaapi-test.lotuscars.com.cn/v50/vehicle/api/register 获取host
可以写一个函数,接收一个URL字符串作为输入,然后从中提取出host部分。函数如下:
```c
#include <stdio.h>
#include <string.h>
void getHostFromURL(const char* url, char* host) {
// 查找协议头的长度
const char* protocal_end = strstr(url, "://");
if(protocal_end == NULL) {
protocal_end = url;
} else {
protocal_end += 3;
}
// 查找host部分的长度
const char* host_start = protocal_end;
const char* host_end = strchr(host_start, '/');
if(host_end == NULL) {
host_end = url + strlen(url);
}
// 将host部分拷贝到host参数中
const size_t host_len = host_end - host_start;
memcpy(host, host_start, host_len);
host[host_len] = '\0';
}
```
这个函数中,首先查找协议头的位置,然后查找host的起始位置和终止位置,最后将host部分拷贝到host参数中。可以使用以下代码进行测试:
```c
int main() {
char url[] = "https://otaapi-test.lotuscars.com.cn/v50/vehicle/api/register";
char host[256];
getHostFromURL(url, host);
printf("Host: %s\n", host);
return 0;
}
```
输出结果为:
```
Host: otaapi-test.lotuscars.com.cn
```
url="https://otaapi-sit.lotuscars.com.cn/v50/vehicle/api/register" 使用sprintf发送http请求时,参数url是不是需要做个变通
在使用`sprintf`发送HTTP请求时,如果请求URL中包含有特殊字符(比如`/`、`:`、`?`等),需要对这些特殊字符进行转义,否则可能会导致HTTP请求失败或发送错误的请求。
在C语言中,可以使用`urlencode`函数将URL中的特殊字符进行转义。`urlencode`函数的实现方式可以参考以下示例代码:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>
char *urlencode(const char *str)
{
char *pstr = (char *)str;
char *buf = (char *)malloc(strlen(str) * 3 + 1);
char *pbuf = buf;
char *hex = "0123456789ABCDEF";
while (*pstr) {
if (isalnum(*pstr) || *pstr == '-' || *pstr == '_' || *pstr == '.' || *pstr == '~') {
*pbuf = *pstr;
} else if (*pstr == ' ') {
*pbuf = '+';
} else {
*pbuf++ = '%';
*pbuf++ = hex[*pstr >> 4];
*pbuf = hex[*pstr & 15];
}
pstr++;
pbuf++;
}
*pbuf = '\0';
return buf;
}
```
使用该函数对请求URL进行转义,示例代码如下:
```c
char *url = "https://otaapi-sit.lotuscars.com.cn/v50/vehicle/api/register";
char *escaped_url = urlencode(url);
char *request = (char *)malloc(strlen(escaped_url) + 100);
sprintf(request, "GET %s HTTP/1.1\r\nHost: %s\r\n\r\n", escaped_url, escaped_url);
//发送HTTP请求
//...
free(escaped_url);
free(request);
```
在以上示例代码中,`urlencode`函数将请求URL中的特殊字符进行了转义,并返回了转义后的字符串。然后,使用`sprintf`函数将转义后的URL和HTTP请求头拼接成完整的HTTP请求,并发送HTTP请求。