GPIOB->CRH|=0XB8B00000;
时间: 2024-06-15 09:06:29 浏览: 15
GPIOB->CRH |= 0xB8B00000; 是一条C语言代码,用于设置GPIOB的控制寄存器高位(CRH)的值为0xB8B00000。这条代码的作用是配置GPIOB的引脚功能和模式。
具体解释如下:
- GPIOB:表示要配置的GPIO端口为GPIOB。
- CRH:表示GPIOB的控制寄存器高位,用于配置引脚8到15的功能和模式。
- |=:表示按位或运算符,将CRH寄存器的值与0xB8B00000进行按位或操作。
- 0xB8B00000:表示要设置的值,以二进制形式表示为10111000101100000000000000000。
根据这个设置,GPIOB的引脚8到15将被配置为特定的功能和模式,具体的功能和模式取决于0xB8B00000的二进制表示。请注意,具体的功能和模式需要参考相关的芯片手册或开发板文档来确定。
相关问题
GPIOB->CRH
GPIOB->CRH是对GPIOB的高位寄存器进行配置的操作。根据引用\[2\]和引用\[3\]的解析,我们可以得出以下结论:
- GPIOB->CRH &= 0X0FFFFFFF; 是将GPIOB的高位寄存器的控制位清零,保持其他位不变。
- GPIOB->CRH |= 8<<28; 是将GPIO_Pin_7配置为上拉输入模式。
综上所述,GPIOB->CRH的操作是将GPIOB的高位寄存器的控制位清零,并将GPIO_Pin_7配置为上拉输入模式。
#### 引用[.reference_title]
- *1* *2* *3* [【浅析STM32之GPIO寄存器(CRL/CRH)配置 】](https://blog.csdn.net/boybs/article/details/125953107)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^insertT0,239^v3^insert_chatgpt"}} ] [.reference_item]
[ .reference_list ]
GPIOB->CRH&=0XFF0FFFFF
GPIOB->CRH is a memory-mapped register in the STM32 microcontroller family that is used to configure the pins of GPIOB port in high-speed mode.
CRH stands for "configuration register high" and refers to the upper 16 bits of the GPIOB configuration register.
Each of these 16 bits corresponds to a pin on the GPIOB port, and can be programmed to control its speed, input/output mode, pull-up/pull-down resistors, and alternate function mapping.
GPIOB->CRH can be accessed and modified by writing to or reading from its memory address using the appropriate instructions in the programming language being used.