欧洲EMC标准EN 301 489-1 V1.9.1：无线电设备电磁兼容性要求

5星 · 超过95%的资源需积分: 7 88 浏览量更新于2024-07-31 收藏 258KB PDF 举报

"EN 301 489-1 V1.9.1 (2011-04)" 是欧洲电磁兼容性（EMC）和无线光谱物质的一项标准，它定义了适用于无线电设备和服务的共同技术要求。这篇文档是最终草案的版本，由欧洲电信标准协会（ETSI）发布，编号为Final draft ETSI EN 301 489-1 V1.9.1 (2011-04)，并且与参考号REN/ERM-EMC-268-1相关联。该标准的主要关键词包括EMC（电磁兼容性）、无线电和法规。 EN 301 489-1标准是欧洲和谐化标准系列的一部分，旨在确保电子设备在欧洲市场上的电磁兼容性，这是为了让各种电子设备能够和谐共存，避免因电磁干扰导致的功能失常。这一标准对无线电设备和服务提出了具体的技术要求，包括电磁辐射、抗干扰能力以及测试方法等，以确保它们在实际操作环境中不会对其他设备产生干扰，同时也能抵御外部电磁环境的影响。标准中可能包含多个电子版本或印刷版，但如有内容差异，PDF格式的版本被视为参考版本。在ETSI秘书处的特定网络驱动器上保存的PDF版本打印件将作为解决争议时的依据。用户在使用这份文档时应注意到，文档中可能会有“Important notice”指出关于不同版本之间可能存在的差异和如何处理的详细信息。此外，EN 301 489-1标准对于制造商来说至关重要，因为他们需要确保其产品符合这些规定，以便获得在欧洲销售和使用的许可。这个标准不仅影响产品设计，还涉及到生产过程、测试和认证流程。不符合标准的产品可能会被市场拒之门外，或者在发现不符合规定后被召回，这对制造商的声誉和经济利益都有重大影响。 EN 301 489-1 V1.9.1是欧洲电子设备制造商必须遵循的重要标准，它规定了无线电设备和服务的电磁兼容性要求，旨在维护无线电频谱的有序使用和设备的正常运行。这份标准通过提供详细的技术规范和测试方法，确保了设备在复杂电磁环境下的稳定性和可靠性。

ETSI

Final draft ETSI EN 301 489

1 V1.9.1 (2011

04)

Part 22: "Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment";

Part 23: "Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA)) Base Station (BS)

radio, repeater and ancillary equipment";

Part 24: "Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable

(UE) radio and ancillary equipment";

Part 25: "Specific conditions for CDMA 1x spread spectrum Mobile Stations and ancillary equipment";

Part 26: "Specific conditions for CDMA 1x spread spectrum Base Stations, repeaters and ancillary equipment";

Part 27: "Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral

devices (ULP-AMI-P)";

Part 28: "Specific conditions for wireless digital video links";

Part 29: "Specific conditions for Medical Data Service Devices (MEDS) operating in the 401 MHz to 402 MHz

and 405 MHz to 406 MHz bands";

Part 31: "Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical

Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P)";

Part 32: "Specific conditions for Ground and Wall Probing Radar applications";

Part 33: "Specific conditions for Ultra Wide Band (UWB) communications devices";

Part 34: "Specific conditions for External Power Supply (EPS) for mobile phones".

Proposed national transposition dates

Date of latest announcement of this EN (doa): 3 months after ETSI publication

Date of latest publication of new National Standard

or endorsement of this EN (dop/e):

6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

ETSI

Final draft ETSI EN 301 489

1 V1.9.1 (2011

04)

1 Scope

The present document contains the common requirements for radio communications equipment and associated ancillary

equipment, in respect of ElectroMagnetic Compatibility (EMC).

Product dependent arrangements necessary to perform the EMC tests on dedicated types of radio communications

equipment, and the assessment of test results, are detailed in the appropriate product related parts of

EN 301 489 series [i.13].

The present document, together with the product related part, specifies the applicable EMC tests, the methods of

measurement, the limits and the performance criteria for radio equipment and associated ancillary equipment. In case of

differences (for instance concerning special conditions, definitions, abbreviations) between part 1 of EN 301 489

series [i.13] and the relevant product related part of EN 301 489 series [i.13], the product related part takes precedence.

Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port

of radio equipment and combinations of radio and associated ancillary equipment are not included in the present

document. Such technical specifications are normally found in the relevant product standards for the effective use of the

radio spectrum.

The environment classification used in the present document refers to the environment classification used in:

• EN 61000-6-3 [i.4] and EN 61000-6-1 [i.5] for the residential, commercial and light industrial environment; or

• TR 101 651 [i.6] for the telecommunication centre environment; or

• ISO 7637-2 [8] for the vehicular environment.

The EMC requirements have been selected to ensure an adequate level of compatibility for apparatus intended to be

used in the environments mentioned above. The levels, however, do not cover extreme cases which may occur in any

location but with low probability of occurrence. The applicable environment(s) should be declared by the manufacturer

and should be in accordance with the equipment documentation.

For radio equipment and associated ancillary equipment intended to be installed in motor vehicles (i.e. ESAs) and not

related to immunity related functions of the vehicle, additional technical requirements necessary to demonstrate

conformance to the motor vehicle EMC Directive 2004/104/EC [i.8], are set out in annex B (normative) of the present

document.

The present document may not cover those cases where a potential source of interference which is producing

individually repeated transient phenomena or a continuous phenomenon is permanently present, e.g. a radar or

broadcast site in the near vicinity. In such a case it may be necessary to use special protection applied to either the

source of interference or the interfered part or both.

Where none of the existing specific product related radio parts covers the required conditions for a particular radio

equipment/service e.g. in case of the initial introduction of a new radio service or a special application, the present

document can be used together with specific information for the radio equipment provided by the manufacturer, for the

purposes of testing to the EMC requirements set out in the present document.

In all cases where a radio product falls within the scope of a specific product related radio part of the standard, the

product related part takes precedence.

Compliance of radio equipment to the requirements of the present document does not signify compliance to any

requirements related to spectrum management or to the use of the equipment (licensing requirements).

Compliance to the requirements of the present document does not signify compliance to any safety requirements.

However, it is the responsibility of the assessor of the equipment to record in the test report any observations regarding

the test sample becoming dangerous or unsafe as a result of the application of the tests called for in the present

document.

NOTE: Radio equipment for use in maritime environment is covered by other ETSI EMC standards.

剩余44页未读，继续阅读

talortang

粉丝: 0
资源: 2

欧洲EMC标准EN 301 489-1 V1.9.1：无线电设备电磁兼容性要求

commons-beanutils-1.9.1-API文档-中文版.zip

cors-filter-2.5 + java-property-utils-1.9.1.zip

EN300328 V1.9.1

ETSI EN 300 468 V1.9.1 (2009-03)

ETSIStandards ETSI EN 300 328 V1.9.1 欧洲电信标准适用于BT，WiFi等设备

EN-300-468-V191-200903_decrypted.pdf

Appium1.9环境搭建-java

DVB系统服务信息规范：ETSI EN 300 468 V1.9.1

欧洲ETSI无线认证标准：EN300328V1.9.1详解

欧洲2.4GHz无线设备EN300328 V1.9.1 RF认证标准详解

最新资源