![](https://csdnimg.cn/release/download_crawler_static/10758992/bg4.jpg)
ISL29035
FN8371 Rev 3.00 Page 4 of 17
December 12, 2016
Absolute Maximum Ratings Thermal Information
VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4.0V
I
2
C Bus (SCL, SDA) and INT Pin Voltage. . . . . . . . . . . . . . . . . . -0.2V to 4.0V
I
2
C Bus (SCL, SDA) and INT Pin Current. . . . . . . . . . . . . . . . . . . . . . . <10mA
Input Voltage Slew Rate (Maximum) . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1V/µs
ESD Ratings
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3kV
Thermal Resistance (Typical)
JA
(°C/W)
6 Ld ODFN Package (Note 4
) . . . . . . . . . . . . . . . . . . . . . 210
Maximum Junction Temperature (TJ
MAX
). . . . . . . . . . . . . . . . . . . . . . . +90°C
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-40°C to +100°C
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see TB477
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTE:
4.
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379
.
Electrical Specifications V
DD
= 3.0V, T
A
= +25°C, 16-bit ADC operation, unless otherwise specified.
DESCRIPTION PARAMETER TEST CONDITIONS
MIN
(Note 7
)TYP
MAX
(Note 7)UNIT
Power Supply Range V
DD
2.25 3.63 V
Supply Current I
DD
57 85 µA
Supply Current when Powered Down I
DD1
Software disabled or auto power-down 0.24 0.51 µA
Supply Voltage Range for I
2
C Interface V
I2C
1.7 3.63 V
ADC Integration/Conversion Time t
int
16-bit ADC data 105 ms
I
2
C Clock Rate Range F
I
2
C
400 kHz
Count Output when Dark DATA_0 E = 0 Lux, Range 0 (1k Lux) 1 5 Counts
Full Scale ADC Code DATA_F 65535 Counts
Part-to-Part Variation (3 Population) %/Value E = 300 Lux, cold white LED
Range 0 (1k Lux)
±5 %
Light Count Output with LSB of 0.015 Lux/Count ADC
R0
E = 300 Lux, cold white LED (Note 5),
ALS Range 0 (1k Lux)
20473 Counts
Light Count Output with LSB of 0.06 Lux/Count ADC
R1
E = 300 Lux, cold white LED (Note 5),
ALS Range 1 (4k Lux)
5100 Counts
Light Count Output with LSB of 0.24 Lux/Count ADC
R2
E = 300 Lux, cold white LED (Note 5),
ALS Range 2 (16k Lux)
1400 Counts
Light Count Output with LSB of 0.96 Lux/Count ADC
R3
E = 300 Lux, cold white LED (Note 5),
ALS Range 3 (64k Lux)
366 Counts
Infrared Count Output (Note 6
)ADC_IR
R0
Range 0 (1k Lux) 1402 1997 2598 Counts
Infrared Count Output (Note 6)ADC_IR
R1
Range 1 (4k Lux) 481 Counts
Infrared Count Output (Note 6
)ADC_IR
R2
Range 2 (16k Lux) 148 Counts
Infrared Count Output (Note 6
)ADC_IR
R3
Range 3 (64k Lux) 42 Counts
SDA Current Sinking Capability I
SDA
45 mA
INT
Current Sinking Capability I
INT
45 mA
NOTES:
5. 550nm green LED is used in production test. The 550nm LED irradiance is calibrated to produce the same DATA count against an illuminance level
of 300 Lux Cold White LED.
6. 850nm IR LED is used in production test. The 850nm LED irradiance is calibrated to produce the same DATA_IR count against and illuminance level
of 210 lux sunlight at sea level.
7. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.