没有合适的资源?快使用搜索试试~ 我知道了~
首页marvell-storage-88se9235-datasheet-2016-01.pdf
marvell-storage-88se9235-datasheet-2016-01.pdf
需积分: 50 26 下载量 51 浏览量
更新于2023-03-03
评论
收藏 336KB PDF 举报
The 88SE9235 is a four-port, 3 Gbps or 6 Gbps SATA Host Bus Adapter that provides a two-lane PCIe 2.0 interface and SATA controller functions. The 88SE9235 supplies four 6 Gbps SATA ports. The 88SE9235 supports devices compliant with the Serial ATA International Organization: Serial ATA Revision 3.1 specification. Figure 1-1 shows the system block diagram.
资源详情
资源评论
资源推荐
Doc No. MV-S108467-00 Rev. C
January 27, 2016
Document Classification: Proprietary
Marvell. Moving Forward Faster
88SE9235 R1.1
Two-Lane PCIe 2.0 to Four-Port 6
Gbps SATA I/O Controller
Datasheet
88SE9235 R1.1 Two-Lane PCIe 2.0 to Four-Port 6 Gbps SATA I/O Controller
Datasheet
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose, without the express written permission of
Marvell. Marvell retains the right to make changes to this document at any time, without notice. Marvell makes
no warranty of any kind, expressed or implied, with regard to any information contained in this document,
including, but not limited to, the implied warranties of merchantability or fitness for any particular purpose.
Further, Marvell does not warrant the accuracy or completeness of the information, text, graphics, or other
items contained within this document.
Marvell products are not designed for use in life-support equipment or applications that would cause a
life-threatening situation if any such products failed. Do not use Marvell products in these types of equipment
or applications.
With respect to the products described herein, the user or recipient, in the absence of appropriate U.S.
government authorization, agrees:
1) Not to re-export or release any such information consisting of technology, software or source code
controlled for national security reasons by the U.S. Export Control Regulations ("EAR"), to a national of EAR
Country Groups D:1 or E:2;
2) Not to export the direct product of such technology or such software, to EAR Country Groups D:1 or E:2, if
such technology or software and direct products thereof are controlled for national security reasons by the
EAR; and,
3) In the case of technology controlled for national security reasons under the EAR where the direct product
of the technology is a complete plant or component of a plant, not to export to EAR Country Groups D:1 or E:2
the direct product of the plant or major component thereof, if such direct product is controlled for national
security reasons by the EAR, or is subject to controls under the U.S. Munitions List ("USML").
At all times hereunder, the recipient of any such information agrees that they shall be deemed to have
manually signed this document in connection with their receipt of any such information.
Copyright © 1999–2016. Marvell International Ltd. All rights reserved. Alaska, ARMADA, Avanta, Avastar,
CarrierSpan, Kinoma, Link Street, LinkCrypt, Marvell logo, Marvell, Moving Forward Faster, Marvell Smart,
PISC, Prestera, Qdeo, QDEO logo, QuietVideo, Virtual Cable Tester, The World as YOU See It, Vmeta,
Xelerated, and Yukon are registered trademarks of Marvell or its affiliates. G.now, HyperDuo, Kirkwood, and
Wirespeed by Design are trademarks of Marvell or its affiliates.
Patent(s) Pending—Products identified in this document may be covered by one or more Marvell patents
and/or patent applications.
For more information, visit our website at: www.marvell.com
ii
Copyright © 2016 Marvell Doc No. MV-S108467-00 Rev. C
January 27, 2016 Document Classification: Proprietary
Ordering Information
iii
Copyright © 2016 Marvell Doc No. MV-S108467-00 Rev. C
January 27, 2016 Document Classification: Proprietary
ORDERING INFORMATION
Ordering Part Numbers and Package Markings
The following figure shows the ordering part numbering scheme for the 88SE9235 part. For complete
ordering information, contact your Marvell FAE or sales representative.
Sample Ordering Part Number
The standard ordering part numbers for the respective solutions are indicated in the following table.
The next figure shows a typical Marvell package marking.
88SE9235 Package Marking and Pin 1 Location
Note: The above drawing is not drawn to scale. The location of markings is approximate. Add-on marks are not
represented. Flip chips vary widely in their markings and flip chip examples are not shown here. For flip chips, the
markings may be omitted per customer requirement.
Ordering Part Numbers
Part Number Description
88SE9235A1-NAA2C000 76-pin QFN 9 mm × 9 mm, Two-Lane PCIe 2.0 to four-port 6 Gbps SATA
Controller.
88SE9235A1-NAA2I000 76-pin Industrial Grade QFN 9 mm × 9 mm, Two-Lane PCIe 2.0 to four-port 6
Gbps SATA Controller.
Part Number
Product Revision
Custom Code
Custom Code
(optional)
88XXXXX - XX - XXX - C000 - XXXX
Temperature Code
C = Commercial
I = Industrial
Environmental Code
+ = RoHS 0/6
–= RoHS 5/6
1 = RoHS 6/6
2 = Green)
Package Code
3-character
alphabetic code
such as BCC, TEH
Custom Code
Extended Part Number
YYWW xx@
Country of Origin
Part number, package code, environmental code e
XXXXX = Part number
AAA = Package code
e = Environmental code
(+ = RoHS 0/6, no code = RoHS 5/6,
1 = RoHS 6/6, 2 = Green)
Country of origin
(contained in the mold ID or
marked as the last line on
the package)
Pin 1 location
Marvell Logo
Lot Number
88XXXXX-AAAe
Date code, custom code, assembly plant code
YYWW = Date code (YY = year, WW = Work Week)
xx = Custom code or die revision
@ = Assembly plant code
88SE9235 R1.1 Two-Lane PCIe 2.0 to Four-Port 6 Gbps SATA I/O Controller Datasheet
THIS PAGE LEFT INTENTIONALLY BLANK
iv
Copyright © 2016 Marvell Doc No. MV-S108467-00 Rev. C
January 27, 2016 Document Classification: Proprietary
Change History
v
Copyright © 2016 Marvell Doc No. MV-S108467-00 Rev. C
January 27, 2016 Document Classification: Proprietary
CHANGE HISTORY
The following table identifies the document change history for Rev. C.
Document Changes *
* The type of change is categorized as: Parameter, Revision, or Update. A Parameter change is a change to a spec value, a Revision
change is one that originates from the chip Revision Notice, and an Update change includes all other document updates.
Location Type Description Date
Global Update Removed preliminary from document title. January 25, 2016
剩余43页未读,继续阅读
jstdown
- 粉丝: 2
- 资源: 25
上传资源 快速赚钱
- 我的内容管理 收起
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
会员权益专享
最新资源
- RTL8188FU-Linux-v5.7.4.2-36687.20200602.tar(20765).gz
- c++校园超市商品信息管理系统课程设计说明书(含源代码) (2).pdf
- 建筑供配电系统相关课件.pptx
- 企业管理规章制度及管理模式.doc
- vb打开摄像头.doc
- 云计算-可信计算中认证协议改进方案.pdf
- [详细完整版]单片机编程4.ppt
- c语言常用算法.pdf
- c++经典程序代码大全.pdf
- 单片机数字时钟资料.doc
- 11项目管理前沿1.0.pptx
- 基于ssm的“魅力”繁峙宣传网站的设计与实现论文.doc
- 智慧交通综合解决方案.pptx
- 建筑防潮设计-PowerPointPresentati.pptx
- SPC统计过程控制程序.pptx
- SPC统计方法基础知识.pptx
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功
评论0