ethernet-controller-i350-datasheet.pdf_ethernetcontroller驱动

需积分: 50 145 浏览量更新于2023-05-11 评论 1 收藏 6.36MB PDF 举报

身份认证购VIP最低享 7 折!

领优惠券(最高得80元）

资源详情

资源评论

资源推荐

Order # 333171-002

Revision 2.4

January 2016

Intel

Ethernet Controller I350

Datasheet

Networking Division (ND)

Features

External Interfaces provided:

 PCIe v2.1 (2.5GT/s and 5GT/s) x4/x2/x1; called PCIe in this

document.

 MDI (Copper) standard IEEE 802.3 Ethernet interface for

1000BASE-T, 100BASE-TX, and 10BASE-T applications

(802.3, 802.3u, and 802.3ab)

 Serializer-Deserializer (SERDES) to support 1000BASE-SX/

LX (optical fiber - IEEE802.3)

 Serializer-Deserializer (SERDES) to support 1000BASE-KX

(802.3ap) and 1000BASE-BX (PICMIG 3.1) for Gigabit

backplane applications

 SGMII (Serial-GMII Specification) interface for SFP (SFP

MSA INF-8074i)/external PHY connections

 NC-SI (DMTF NC-SI) or SMBus for Manageability connection

to BMC

 IEEE 1149.6 JTAG

Performance Enhancements:

 PCIe v2.1 TLP Process Hints (TPH)

 UDP, TCP and IP Checksum offload

 UDP and TCP Transmit Segmentation Offload (TSO)

 SCTP receive and transmit checksum offload

Virtualization ready:

 Next Generation VMDq support (8 VMs)

 Support of up to 8 VMs per port (1 queue allocated to each

VM)

 PCI-SIG I/O SR-IOV support (Direct assignment)

 Queues per port: 8 TX and 8 RX queues

Power saving features:

 Advanced Configuration and Power Interface (ACPI) power

management states and wake-up capability

 Advanced Power Management (APM) wake-up functionality

 Low power link-disconnect state

 PCIe v2.1 LTR

 DMA Coalescing for improved system power management

 EEE (IEEE802.3az) for reduced power consumption during

low link utilization periods

IEEE802.1AS - Timing and Synchronization:

 IEEE 1588 Precision Time Protocol support

 Per-packet timestamp

Total Cost Of Ownership (TCO):

 IPMI BMC pass-thru; multi-drop NC-SI

 Internal BMC to OS and OS to BMC traffic support

Additional product details:

 17x17 (256 Balls) or 25x25 (576 Balls) PBGA package

 Estimated power: 2.8W (max) in dual port mode and 4.2W

(max) in quad port mode

 Memories have Parity or ECC protection

Revision History — Intel

Ethernet Controller I350

Revision History

Rev Date Comments

.3 1/8/2010

Initial public release.

.5 5/21/2010

Updated using latest internal specs.

1.0 1/7/2011

Updated using latest internal specs.

1.1 4/6/2011

Updated using latest internal specs.

1.9 4/14/2011

Updated with latest internal specs.

Version number moved to 1.9 for PRQ.

1.91 5/6/2011

Added or updated:

• Section 6.4.2, Port Identification LED blinking (Word 0x04)

• Section 13.1, Thermal Sensor and Thermal Diode

• Updated power numbers.

1.92 5/10/2011

Added (improves coverage of 2-port 17X17 package):

• Section 2.2.13, 2-Port 17x17 PBGA Package Pin List (Alphabetical)

• Section 2.2.14, 2-Port 17x17 PBGA Package No-Connect Pins

1.93 5/20/2011

Updated.

• Section 1.6, I350 Packaging Options. Updated to cover both 17x17 options.

• Section 11-5, Flash Timing Diagram. Removed meaningless line from diagram.

• Section 11.7.1.1, 17x17 PBGA Package Schematics. Corrected display issue

with diagram.

2.00 6/23/2011

SRA release.

• RSVD_TX_TCLK was expressed as 1.25MHZ (clock speed). Corrected to

125MHz in two places. See Table 2-10, Analog Pins, Table 2-23, PHY Analog

Pins.

• Section 11.7.2.1, 25x25 PBGA Package Schematics. Diagram updated.

2.01 6/24/2011

• Section 8.5.5, Flow Control Receive Threshold Low - FCRTL0 (0x2160; R/W).

Changed: “at least 1b (at least 16 bytes)” to “3b (at least 48 bytes) Diagram

updated”.

2.02 8/2/2011

• Figure 7-26, Figure 7-26 build issues corrected.

• Section 10.6.3.16, Thermal Sensor Commands. Note added (“Thermal Sensor

configuration can be done only through NC-SI channel 0.”).

2.03 8/25/2011

• Section 6.2.22, Functions Control (Word 0x21), bit 9 note; Section 9.4.11.4,

Base Address Register Fields, bit 9 description. Both contain the updated text:

“This bit should be set only on systems that do not generate prefetchable

cycles.”

• Section 8.26.1, Internal PHY Configuration - IPCNFG (0x0E38, RW) and

Section 8.26.2, PHY Power Management - PHPM (0x0E14, RW); tables

reformatted.

• Table 10-49, Driver Info Host Command, Byte 1; description updated.

• Table 11-6, Power Consumption 2 Ports, D0a - Active Link row, total power

column has been corrected.

2.04 9/16/2011

• Section 5.1.1, PCI Device Power States. Section updated. See text starting

with “The PCIe link state follows the power management state of the device...”

• Section 6.3.11, NC-SI Configuration Module (Global MNG Offset 0x0A).

include: Offsets 0x01, 0x03, 0x05, and 0x07

• Table 8-10, Usable FLASH Size and CSR Mapping Window Size. Table added to

Datasheet.

• Table 10-30, Supported NC-SI Commands. “Set Ethernet Mac Address”

corrected to “Set MAC Address”. “Clear Ethernet MAC Address” removed from

supported. This is an obsolete reference.

Intel

Ethernet Controller I350 — Revision History

2.05 12/20/2011

• Section 6.3.12.2, Traffic Type Data - Offset 0x1. Default values of 01 added for

all traffic types.

• Section 6.4.9, Reserved/3rd Party External Thermal Sensor – (Word 0x3E).

New reserved section added. Section 8.16.28.1, Time Sync Interrupt Cause

“Once ICR.Time_Sync is set, TSICR should be read to determine the actual

interrupt cause and to enable reception of an additional ICR.Time_Sync

interrupt.”

• Figure 12-6: Updated to correct error. Section 12.5, Oscillator Support:

Contains similar update in the section’s first bullet.

2.06 4/10/2012

• Section 3.1.7.9, Completion with Completer Abort (CA). The discussion has

been corrected. The updated paragraph is: “A DMA master transaction ending

with a Completer Abort (CA) completion causes all PCIe master transactions to

stop; the PICAUSE.ABR bit is set and an interrupt is generated if the

appropriate mask bits are set. To enable PCIe master transactions following

reception of a CA completion, software issues an FLR to the right function or a

PCI reset to the device and re-initializes the function(s).”

• Section 6.3.9.17, NC-SI over MCTP Configuration - 0ffset 0x10. Phrase in bit 7

description updated. New text: “If cleared, a payload type byte is expected in

NC-SI over MCTP packets after the packet type...”

• Section 6.4.3, EEPROM Image Revision (Word 0x05). Table updated; bit

assignment descriptions changed. Changed to: 15:12 EEPROM major version;

11:8 are reserved; 7:0 EEPROM minor version. Example given in note.

• Section 9.6.6.2, LTR Capabilities (0x1C4; RW). The reserved fields (bits 15:13

and 31:29) now indicate RO, not RW.

• Figure 11-11 : Coupling cap data in figure corrected;

changed 10pf to 1000pf.

• Table 12-4, Crystal Manufacturers and Part Numbers. Footnote added to table

for 7A25000165. Text states: “This part footprint compatible with X540

designs.”

Rev Date

Comments

Revision History — Intel

Ethernet Controller I350

2.1 3/22/2013

• Section 2.3.4, NC-SI Interface Pins. Notes added. They specify pull-ups/downs

used when NC-SI is disconnected.

• Section 7.8.2.2.5, Serial ID. New text provided: “The serial ID capability is not

supported in VFs.”

• Section 8.8.10, Interrupt Cause Set Register - ICS (0x1504; WO). Time Sync

(bit 19) exposed.

• Table 11-6, Power Consumption 2 Ports. Some numbers updated. See bold

copy.

• Revised Ta ble 2-15 - 2-Port 17x17 PBGA Package Pin List (Alphabetical); SDP2

and SDP3 connections.

• Revised Section 2.3.8 (Power Supply and Ground Pins); removed C4.

• Revised Section 2.3.9 (25x25 PBGA Package Pin List (Alphabetical); C4 signal

name change.

• Revised Section 3.7.6.3.1 (Setting Powerville to Internal PHY loopback Mode);

added new bullet.

• Revised Section 4.3.5 (Registers and Logic Reset Affects); step 10.

• Revised Section 6.2.17 (PCIe Control 1 (Word 0x1B); bit 14 description.

• Revised Section 6.3.9.17 (NC-SI over MCTP Configuration - 0ffset 0x10); bit 7

description.

•Added Section 6.4.6.11 through Section 6.4.6.18 and (PXE VLAN Configuration

Pointer (0x003C) bit descriptions.

• Revised Table 8-6 - Register Summary); Management Flex UDP/TCP Ports

address.

• Revised Section 8.8.9 (Interrupt Cause Read Register - ICR (0x1500; RC/

W1C); bit 20 description.

• Revised Section 10.5.8.1 (Transmit Errors in Sequence Handling); note after

table 10-10.

• Revised Section 10.7.1.3 (Simplified MCTP Mode); removed payload type

references.

• Revised Section 10.7.4.1 (NC-SI Packets Format).

•Added Section 10.7.4.1.1 (Control Packets).

• Revised Section 10.7.4.1.2 (Command Packets); payload type and message

type.

• Revised Section 10.7.4.1.3 (Response Packets); payload type and message

type.

• Revised Section 11.3.1 (Power Supply Specification); added second footnote.

2.2 1/27/14

•Added Section 3.7.6.6, Line Loopback.

• Section 6.2.24, Initialization Control 3 (LAN Base Address + Offset 0x24) —

Updated description of Com_MDIO field.

• Section 8.1.3, Register Summary — Corrected offset value for VFMPRC in Table

8-6.

• Section 8.27.3, Register Set - CSR BAR — Corrected Virtual Address and

Physical Address Base values for VFMPRC in associated table.

• Section 8.28.43, Multicast Packets Received Count - VFMPRC (0x0F38; RO) —

Corrected address value.

• Section 10.6.2, Supported Features, Table 10-30 — Changed “Supported over

MCTP” value from No to Yes for “Select Package” and “Deselect Package”

commands.

• Figure 11-5 — Changed Output Valid symbol from T

Val

to T

to match

description in Table 11-15.

• Figure 11-6 — Changed Output Valid symbol from T

Val

to T

to match

description in Table 11-16.

• Section 13.5.4, Package Thermal Characteristics — Revised text related to

Flotherm* models.

2.3

• Updated Section 6.5.7.2.

• Updated Section 11.3.1.

• Updated Section 11.3.1.1.

• Updated Section 13.5.4.

2.4 January 2016

• Updated note under Table 2-20 (NC-SI Interface Pins; changed pull-up to pull-

down for pins NCSI_TXD[1:0]).

Rev Date

Comments

剩余1009页未读，继续阅读

disheng727

粉丝: 0
资源: 5

会员权益专享

ethernet-controller-i350-datasheet.pdf

评论0

会员权益专享

最新资源

ethernet-controller-i350-datasheet.pdf

评论0

intel 千兆网卡开发手册

intel i350网卡 reference manual

INTEL I350 PCIEx4转4路千兆以太网芯片— 硬件参考设计+技术手册资料.rar

linux查看网口硬件信息

eeupdate最新版本

ubuntu安装i350网卡驱动

intel i350 pciex4转4路千兆以太网芯片i350 硬件参考设计+技术手册资料.zip

intel i350 pciex1

intel i350网卡驱动

i350am4设计参考

i350 t4和t4 v2区别

i350am4和t4区别

intel i350调试指南

dpdk下的igb_uio驱动下载编译配置

Linux 内核源码中的其他 PCI 驱动程序详细分析

Network devices using DPDK-compatible driver ============================================ 0000:04:00.1 'I350 Gigabit Network Connection 1521' drv=igb_uio unused=igb,uio_pci_generic如何重启这块网卡

esxi6.7 igb

网卡datasheet

i210-ethernet-controller-datasheet

intel_i350四光口&四电口配置文件

会员权益专享

最新资源