![](https://csdnimg.cn/release/download_crawler_static/5631303/bg4.jpg)
4
Restoring an SP Boot Image
Restoring an SP Boot Image
Starting a Hyperterm Session
A Hyperterm session lets you communicate with a device
connected over a COM port, such as an SP.
1. To start a Hyperterm session, follow this path:
Start > Programs > Accessories > Communications >
Hyperterminal
2. When the software asks for a name, create a meaningful name; for
example, AX100; then click OK.
The software displays a Connect to screen.
3. In the Connect using box, select COM1 or COM2 from the
pull-down list.
The software displays a settings screen.
4. Select the following settings:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
5. Click OK.
The Hyperterm session is now running, as you can see from the
timer displayed at the lower left of the screen. You will use this
session to communicate with the SP.
Recovery Procedure
1. Reset the problem SP. The easiest way to do this is to unplug and
then plug in the line cord to the SP’s power supply. See Figure 2.
Be prepared to watch for the alphabetic power-up test display in
the Hyperterm window.