没有合适的资源?快使用搜索试试~ 我知道了~
首页APDS-9960:集成多功能传感器的手势与光照IC数据手册
APDS-9960:集成多功能传感器的手势与光照IC数据手册
需积分: 10 2 下载量 43 浏览量
更新于2024-07-21
收藏 1.06MB PDF 举报
"APDS-9960是一款集成了数字距离感应、环境光感应、RGB色彩感应和手势识别功能的多合一IC。该设备具有高度集成的特性,封装尺寸仅为3.94mm x 2.36mm x 1.35mm,内部包含一个红外LED和工厂校准的LED驱动器,确保与现有布局的无缝替换。 其中,手势识别是其亮点之一。APDS-9960采用四向光敏二极管来捕捉反射的红外能量,通过集成的LED提供光源。通过先进的设计,手势引擎能够自动激活(基于接近传感器的结果),并进行背景光抑制、交叉干扰消除、双8位数据转换器、节能的数据转换延迟、32数据集FIFO(先进先出缓冲器)以及中断驱动的I2C总线通信。这种设计使其能够精确识别各种移动设备上的简单动作,如上、下、左、右,甚至更复杂的交互。 在功耗控制和噪声管理方面,APDS-9960表现优秀。它优化了能源消耗,使得在保持高性能的同时,能有效降低待机状态下对电池的消耗。通过精心设计的电路,设备能够在高精度和低功耗之间找到平衡,这对于现代电子设备的高效运行至关重要。 此外,环境光感应(ALS)部分允许设备准确测量周围环境的光照强度,这对于许多应用场景,如智能照明、手机相机的自动曝光控制等都十分有用。RGB色彩感应则可以感知环境中的色彩信息,用于色彩补偿或增强视觉效果,广泛应用于显示器调光、AR/VR应用等领域。 APDS-9960凭借其强大的多功能性和小型化的封装,为设计师提供了灵活且高效的解决方案,适合于对传感性能有高要求的便携式和物联网设备。如果你正在寻找一款能够提升用户体验、简化硬件设计的光学传感器,APDS-9960无疑是一个值得考虑的选择。"
资源详情
资源推荐
7
0
4000
8000
12000
16000
20000
0 4000 8000 12000 16000 20000
Avg Sensor LUX
Meter LUX
0
200
400
600
800
1000
0 200 400 600 800 1000
Avg Sensor LUX
Meter LUX
2
3
4
5
Avg Sensor LUX
0
1
Meter LUX
0 1 2 3 4 5
0.60
0.70
0.80
0.90
1.00
1.10
1.20
1.30
1.40
-60 -40 -20 0 20 40 60 80 100
Normalized IDD @ 3V
Temperature (°C)
0.60
0.70
0.80
0.90
1.00
1.10
1.20
1.30
1.40
2.2 2.4 2.6 2.8 3 3.2 3.4 3.6 3.8 4
Normalized IDD @ 3V 25°C
VDD (V)
0%
20%
40%
60%
80%
100%
120%
300 400 500 600 700 800 900 1000 1100
Normalized Responsivity
Wavelength (nm)
Clear
Red
Green
Blue
Up/Down/Left/Right
R
B
C
G
U,D,L,R
Figure 4a. Normalized IDD vs. VDD
Figure 3c. ALS Sensor LUX vs Meter LUX using White Light
Figure 3a. ALS Sensor LUX vs Meter LUX using White Light
Figure 3b. ALS Sensor LUX vs Meter LUX using Incandescent Light
Figure 2. Spectral Response
Figure 4b. Normalized IDD vs. Temperature
8
I
2
C-bus Protocol
A Acknowledge (0)
N Not Acknowledged (1)
P Stop Condition
R Read (1)
S Start Condition
Sr Repeated Start Condition
W Write (0)
… Continuation of protocol
Master-to-Slave
Slave-to-Master
1 7 1 1 8 1 8 1 1
S Slave Address W A Register Address A Data A ... P
I
2
C-bus Write Protocol
1 7 1 1 8 1 1 7 1 1 8 1
S Slave Address W A Register Address A Sr Slave Address R A Data A
8 1 1
Data A ... P
1 7 1 1 8 1 8 1 1
S Slave Address R A Data A Data A ... P
I
2
C-bus Read Protocol
The I
2
C-bus standard provides for three types of bus trans-
action: read, write, and a combined protocol. During a
write operation, the rst byte written is a command byte
followed by data. In a combined protocol, the rst byte
written is the command byte followed by reading a series
of bytes. If a read command is issued, the register address
from the previous command will be used for data access.
Likewise, if the MSB of the command is not set, the device
will write a series of bytes at the address stored in the last
valid command with a register address. The command
byte contains either control information or a 5-bit register
address. The control commands can also be used to clear
interrupts.
The I
2
C-bus protocol was developed by Philips (now NXP).
For a complete description of the I
2
C-bus protocol, please
review the NXP I
2
C-bus design specication at http://
www.i2c−bus.org/references/.
I
2
C-bus Protocol
Interface and control are accomplished through an I
2
C-bus
serial compatible interface (standard or fast mode) to a set
of registers that provide access to device control functions
and output data. The devices support the 7-bit I
2
C-bus ad-
dressing protocol.
The device supports a single slave address of 0×39 Hex
using 7-bit addressing protocol. (Contact factory for other
addressing options.)
Figure 5b. Normalized LED Angular Emitting ProleFigure 5a. Normalized PD Responsitivity vs. Angular Displacement
I
2
C-bus Read Protocol - Combined Format
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
-50 -40 -30 -20 -10 0 10 20 30 40 50
Normalized Responsitivity
Angle (Deg)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
-60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60
Normalized Radiant Intensity
Angle (Deg)
Half-power point
Half-power
point
剩余37页未读,继续阅读
dingxuetao1
- 粉丝: 3
- 资源: 5
上传资源 快速赚钱
- 我的内容管理 展开
- 我的资源 快来上传第一个资源
- 我的收益 登录查看自己的收益
- 我的积分 登录查看自己的积分
- 我的C币 登录后查看C币余额
- 我的收藏
- 我的下载
- 下载帮助
最新资源
- C++多态实现机制详解:虚函数与早期绑定
- Java多线程与异常处理详解
- 校园导游系统:无向图实现最短路径探索
- SQL2005彻底删除指南:避免重装失败
- GTD时间管理法:提升效率与组织生活的关键
- Python进制转换全攻略:从10进制到16进制
- 商丘物流业区位优势探究:发展战略与机遇
- C语言实训:简单计算器程序设计
- Oracle SQL命令大全:用户管理、权限操作与查询
- Struts2配置详解与示例
- C#编程规范与最佳实践
- C语言面试常见问题解析
- 超声波测距技术详解:电路与程序设计
- 反激开关电源设计:UC3844与TL431优化稳压
- Cisco路由器配置全攻略
- SQLServer 2005 CTE递归教程:创建员工层级结构
资源上传下载、课程学习等过程中有任何疑问或建议,欢迎提出宝贵意见哦~我们会及时处理!
点击此处反馈
安全验证
文档复制为VIP权益,开通VIP直接复制
信息提交成功