Intel 80386程序员参考手册：1986版原始英文文档

需积分: 13 100 浏览量更新于2024-07-26 收藏 1.05MB PDF 举报

"Intel 80386 Programmer's Reference Manual" 《Intel 80386程序员参考手册》是Intel公司在1986年发布的一本详细阐述80386处理器架构和技术的原始英文文档。这本书对于理解i386微处理器的工作原理及其在个人计算机系统中的应用至关重要。Intel公司明确指出，该手册中的信息可能存在错误，并且不提供任何保修，同时保留随时更新规格而不事先通知的权利。 80386，也称为i386，是Intel推出的一款32位微处理器，它是80x86处理器家族的重要成员，为后来的x86架构奠定了基础。这个处理器引入了多任务、虚拟内存管理和保护模式等功能，极大地提升了个人电脑的性能和灵活性。手册中可能涵盖了以下关键知识点： 1. **处理器架构**：包括80386的内部结构，如CPU核心、寄存器、指令集、寻址模式等。80386有8个16位通用寄存器，32个32位段寄存器，以及32位算术逻辑单元（ALU）等。 2. **指令集**：80386扩展了8086的16位指令集，增加了大量的32位指令，支持浮点运算、字符串操作、位操作和新的寻址模式。此外，还包括了对保护模式和虚拟8086模式的支持。 3. **保护模式**：这是80386的一个重大改进，允许系统在多任务环境下运行，每个任务可以拥有独立的地址空间，通过特权级和页表实现内存保护。 4. **虚拟内存管理**：80386引入了分页机制，可以将物理内存划分为固定大小的页，通过页表映射到虚拟地址，实现内存的动态管理和交换。 5. **中断和异常处理**：详细介绍了中断和异常的处理机制，包括硬件中断、软件中断和异常处理流程。 6. **总线和I/O系统**：80386支持多种总线标准，如ISA、EISA和MCA，以及如何与外部设备进行通信。 7. **系统设计和配置**：指导如何构建基于80386的系统，包括BIOS的编写、内存配置、中断向量表的设置等。 8. **开发工具和调试**：可能包含有关汇编语言编程、调试工具的使用以及优化代码的建议。 9. **知识产权声明**：Intel公司强调了手册中提及的商标和标识仅用于识别Intel产品，未经许可不得擅自使用。对于开发者和硬件工程师来说，这本手册是理解和利用80386处理器功能的必备参考资料，可以帮助他们设计和优化基于80386的系统，或者为现代x86架构的理解提供历史背景。由于80386对后续x86处理器的影响深远，因此即使在今天，该手册仍然具有一定的参考价值。

INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986

Page 16 of 421

1. Protected Mode.

2. Real-Address Mode.

3. Virtual 8086 Mode.

Protected mode is the natural 32-bit environment of the 80386 processor. In

this mode all instructions and features are available.

Real-address mode (often called just "real mode") is the mode of the

processor immediately after RESET. In real mode the 80386 appears to

programmers as a fast 8086 with some new instructions. Most applications of

the 80386 will use real mode for initialization only.

Virtual 8086 mode (also called V86 mode) is a dynamic mode in the sense

that the processor can switch repeatedly and rapidly between V86 mode and

protected mode. The CPU enters V86 mode from protected mode to execute an

8086 program, then leaves V86 mode and enters protected mode to continue

executing a native 80386 program.

The features that are available to applications programs in protected mode

and to all programs in V86 mode are the same. These features form the

content of Part I. The additional features that are available to systems

software in protected mode form Part II. Part III explains real-address

mode and V86 mode, as well as how to execute a mix of 32-bit and 16-bit

programs.

Available in All Modes Part I ── Applications Programming

Available in Protected Part II ── Systems Programming

Mode Only

Compatibility Modes Part III ── Compatibility

1.1.1 Part I ── Applications Programming

This part presents those aspects of the architecture that are customarily

used by applications programmers.

Chapter 2 ── Basic Programming Model: Introduces the models of memory

organization. Defines the data types. Presents the register set used by

applications. Introduces the stack. Explains string operations. Defines the

parts of an instruction. Explains addressing calculations. Introduces

interrupts and exceptions as they may apply to applications programming.

Chapter 3 ── Application Instruction Set: Surveys the instructions commonly

used for applications programming. Considers instructions in functionally

related groups; for example, string instructions are considered in one

section, while control-transfer instructions are considered in another.

Explains the concepts behind the instructions. Details of individual

instructions are deferred until Part IV, the instruction-set reference.

INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986

Page 17 of 421

1.1.2 Part II ── Systems Programming

This part presents those aspects of the architecture that are customarily

used by programmers who write operating systems, device drivers, debuggers,

and other software that supports applications programs in the protected mode

of the 80386.

Chapter 4 ── Systems Architecture: Surveys the features of the 80386 that

are used by systems programmers. Introduces the remaining registers and data

structures of the 80386 that were not discussed in Part I. Introduces the

systems-oriented instructions in the context of the registers and data

structures they support. Points to the chapter where each register, data

structure, and instruction is considered in more detail.

Chapter 5 ── Memory Management: Presents details of the data structures,

registers, and instructions that support virtual memory and the concepts of

segmentation and paging. Explains how systems designers can choose a model

of memory organization ranging from completely linear ("flat") to fully

paged and segmented.

Chapter 6 ── Protection: Expands on the memory management features of the

80386 to include protection as it applies to both segments and pages.

Explains the implementation of privilege rules, stack switching, pointer

validation, user and supervisor modes. Protection aspects of multitasking

are deferred until the following chapter.

Chapter 7 ── Multitasking: Explains how the hardware of the 80386 supports

multitasking with context-switching operations and intertask protection.

Chapter 8 ── Input/Output: Reveals the I/O features of the 80386, including

I/O instructions, protection as it relates to I/O, and the I/O permission

map.

Chapter 9 ── Exceptions and Interrupts: Explains the basic interrupt

mechanisms of the 80386. Shows how interrupts and exceptions relate to

protection. Discusses all possible exceptions, listing causes and including

information needed to handle and recover from the exception.

Chapter 10 ── Initialization: Defines the condition of the processor after

RESET or power-up. Explains how to set up registers, flags, and data

structures for either real-address mode or protected mode. Contains an

example of an initialization program.

Chapter 11 ── Coprocessing and Multiprocessing: Explains the instructions

and flags that support a numerics coprocessor and multiple CPUs with shared

memory.

Chapter 12 ── Debugging: Tells how to use the debugging registers of the

80386.

INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986

Page 18 of 421

1.1.3 Part III ── Compatibility

Other parts of the book treat the processor primarily as a 32-bit machine,

omitting for simplicity its facilities for 16-bit operations. Indeed, the

80386 is a 32-bit machine, but its design fully supports 16-bit operands and

addressing, too. This part completes the picture of the 80386 by explaining

the features of the architecture that support 16-bit programs and 16-bit

operations in 32-bit programs. All three processor modes are used to

execute 16-bit programs: protected mode can directly execute 16-bit 80286

protected mode programs, real mode executes 8086 programs and real-mode

80286 programs, and virtual 8086 mode executes 8086 programs in a

multitasking environment with other 80386 protected-mode programs. In

addition, 32-bit and 16-bit modules and individual 32-bit and 16-bit

operations can be mixed in protected mode.

Chapter 13 ── Executing 80286 Protected-Mode Code: In its protected mode,

the 80386 can execute complete 80286 protected-mode systems, because 80286

capabilities are a subset of 80386 capabilities.

Chapter 14 ── 80386 Real-Address Mode: Explains the real mode of the 80386

CPU. In this mode the 80386 appears as a fast real-mode 80286 or fast 8086

enhanced with additional instructions.

Chapter 15 ── Virtual 8086 Mode: The 80386 can switch rapidly between its

protected mode and V86 mode, giving it the ability to multiprogram 8086

programs along with "native mode" 32-bit programs.

Chapter 16 ── Mixing 16-Bit and 32-Bit Code: Even within a program or task,

the 80386 can mix 16-bit and 32-bit modules. Furthermore, any given module

can utilize both 16-bit and 32-bit operands and addresses.

1.1.4 Part IV ── Instruction Set

Parts I, II, and III present overviews of the instructions as they relate

to specific aspects of the architecture, but this part presents the

instructions in alphabetical order, providing the detail needed by

assembly-language programmers and programmers of debuggers, compilers,

operating systems, etc. Instruction descriptions include algorithmic

description of operation, effect of flag settings, effect on flag settings,

effect of operand- or address-size attributes, effect of processor modes,

and possible exceptions.

1.1.5 Appendices

The appendices present tables of encodings and other details in a format

designed for quick reference by assembly-language and systems programmers.

INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986

Page 20 of 421

● When loading a register, always load the undefined bits as zeros or

reload them with values previously stored from the same register.

────────────────────────────────────────────────────────────────────────────

NOTE

Depending upon the values of undefined register bits will make software

dependent upon the unspecified manner in which the 80386 handles these

bits. Depending upon undefined values risks making software incompatible

with future processors that define usages for these bits. AVOID ANY

SOFTWARE DEPENDENCE UPON THE STATE OF UNDEFINED 80386 REGISTER BITS.

Figure 1-1. Example Data Structure

GREATEST DATA STRUCTURE

ADDRESS

31 23 15 7 0 ◄──BIT

╔═══════════════╪═══════════════╪═══════════════╪═══════════════╗ OFFSET

║ ║28

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣

║ ║24

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣

║ ║20

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣

║ ║16

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣

║ ║12

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣

║ ║8

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣

║ UNDEFINED ║4

╠═══════════════╪═══════════════╪═══════════════╪═══════════════╣ SMALLEST

║ BYTE 3 BYTE 2 BYTE 1 BYTE 0 ║0 ADDRESS

╚═══════════════╪═══════════════╪═══════════════╪═══════════════╝▲

BYTE OFFSET───┘

1.3.3 Instruction Operands

When instructions are represented symbolically, a subset of the 80386

Assembly Language is used. In this subset, an instruction has the following

format:

label: prefix mnemonic argument1, argument2, argument3

where:

● A label is an identifier that is followed by a colon.

● A prefix is an optional reserved name for one of the instruction

prefixes.

● A mnemonic is a reserved name for a class of instruction opcodes that

have the same function.

剩余420页未读，继续阅读

j2ee2000

粉丝: 0
资源: 6

Intel 80386程序员参考手册：1986版原始英文文档

Intel 80386 Reference Programmers Manual-i386技术文档

80386汇编

Intel 80386 Reference Programmer's Manual

Intel_80386_Manual

80386开发文档 Intel 80386 Programmer's Reference Manual

INTEL 80386 Programmer's Reference Manual

INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986

intel 80386 programmer's reference manual.zip

intel 80386手册

Intel 80386 Mannul

最新资源