WARNING: [Labtools 27-3361] The debug hub core was not detected. Resolution: 1. Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock and is active. 2. Make sure the BSCAN_SWITCH_USER_MASK device property in Vivado Hardware Manager reflects the user scan chain setting in the design and refresh the device. To determine the user scan chain setting in the design, open the implemented design and use 'get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub]'. For more details on setting the scan chain property, consult the Vivado Debug and Programming User Guide (UG908). WARNING: [Labtools 27-3403] Dropping logic core with cellname:'u_ila_0' from probes file, since it cannot be found on the programmed device.
时间: 2024-04-25 07:26:58 浏览: 58
这是一条警告信息,可能意味着在调试过程中出现了一些问题。提示信息建议检查调试核心连接的时钟是否处于活动状态,并确保 Vivado Hardware Manager 中的 BSCAN_SWITCH_USER_MASK 设备属性反映了设计中的用户扫描链设置。可以打开实现的设计,使用命令“get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub]”来确定设计中的用户扫描链设置。如果需要设置扫描链属性,可以参考 Vivado Debug and Programming User Guide (UG908)。另外,还提示了一个名为“u_ila_0”的逻辑核心从探针文件中被删除了,可能是因为它在已编程设备上找不到。
相关问题
WARNING: [Labtools 27-3361] The debug hub core was not detected. Resolution: 1. Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock and is active. 2. Make sure the BSCAN_SWITCH_USER_MASK device property in Vivado Hardware Manager reflects the user scan chain setting in the design and refresh the device. To determine the user scan chain setting in the design, open the implemented design and use 'get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub]'. For more details on setting the scan chain property, consult the Vivado Debug and Programming User Guide (UG908).
这个警告信息表示Vivado Hardware Manager没有检测到debug hub core。出现这个问题的原因可能是debug hub core连接的时钟不是自由运行的,或者时钟没有启动。解决这个问题可以尝试以下步骤:
1. 确保连接到debug hub core的时钟是自由运行的,并且已经启动。
2. 确保Vivado Hardware Manager中的BSCAN_SWITCH_USER_MASK设备属性反映了设计中的用户扫描链设置,并刷新设备。要确定设计中的用户扫描链设置,请打开实现的设计并使用“get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub]”命令。
3. 如果以上步骤都无法解决问题,请参考Vivado Debug and Programming User Guide(UG908)中有关设置扫描链属性的详细内容。
【vivado】ILA调试报错 The debug hub core was not detected 以及 Data read from hw_ila [hw_ila_1] is corrupted...
这种错误通常是由于以下原因之一导致的:
1. 未正确连接调试接口:请确保正确连接调试接口,并在使用ILA前进行硬件调试。
2. 未正确配置调试IP核:请确保正确配置了调试IP核并生成了比特流文件。
3. 调试IP核版本不兼容:请确保调试IP核版本与Vivado版本兼容,并尝试更新调试IP核版本。
4. 设计中存在错误:请检查设计中是否存在错误,并尝试进行修复。
对于报错 "Data read from hw_ila [hw_ila_1] is corrupted",一般是由于存储数据的缓存区大小不够导致的。可以尝试增加缓存区大小,或者减小采样率以降低数据传输速率,以解决此问题。