外部触发中断的代码怎么写,用while来写
时间: 2024-01-01 21:06:51 浏览: 22
在循环中,可以使用一个标志变量来表示是否外部触发了中断。如果触发了中断,就改变标志变量的值,然后跳出循环。
下面是一个示例代码:
```python
interrupt_flag = False # 初始化标志变量为False
while not interrupt_flag:
# 执行循环体代码
# ...
# 检查是否触发了中断
if check_interrupt():
interrupt_flag = True # 改变标志变量的值,跳出循环
# 处理中断的代码
# ...
```
其中,`check_interrupt()`是一个检查是否触发了中断的函数,具体实现可以根据具体的需求来编写。在循环中,每次执行循环体代码时都会检查一次是否触发了中断,如果触发了中断,就改变标志变量的值,跳出循环。跳出循环后,就可以处理中断的代码了。
相关问题
stm32的外部触发中断的代码怎么写,用while来写
对于STM32外部触发中断的代码,可以使用以下while循环代码:
```
while(1)
{
// 等待外部中断触发
while(!EXTI_GetITStatus(EXTI_LineX)); // LineX为中断线号,需根据实际情况修改
// 标志位清零
EXTI_ClearITPendingBit(EXTI_LineX);
// 中断处理代码
// ...
// 继续等待下一次中断触发
}
```
其中,EXTI_GetITStatus()函数用于判断中断标志位是否被置位,如果置位则表示外部中断被触发;EXTI_ClearITPendingBit()函数用于清除中断标志位,避免重复触发中断;while循环代码则用于等待下一次中断触发。需要注意的是,该代码中的中断处理代码部分需要根据实际情况进行修改。
用C语言写STM32单片机定时外部中断的代码
以下是一个使用C语言编写的STM32单片机定时外部中断的示例代码:
```c
#include "stm32f10x.h"
void EXTI0_IRQHandler(void) {
// 处理中断事件
}
void TIM2_IRQHandler(void) {
// 处理定时器事件
}
int main(void) {
// 初始化GPIO和NVIC
GPIO_InitTypeDef GPIO_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_Init(GPIOA, &GPIO_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x00;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x00;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
// 初始化定时器
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
TIM_TimeBaseStructure.TIM_Period = 1000 - 1;
TIM_TimeBaseStructure.TIM_Prescaler = 7200 - 1;
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x01;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x00;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
TIM_Cmd(TIM2, ENABLE);
// 进入主循环
while (1) {
// 执行其它任务
}
}
```
这段代码使用了STM32的外部中断和定时器功能,可以在外部中断触发时执行相应的处理函数,也可以在定时器中断触发时执行相应的处理函数。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![c](https://img-home.csdnimg.cn/images/20210720083646.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)