arduino持续输出数字
时间: 2024-02-04 21:32:11 浏览: 41
要让Arduino持续输出数字,您可以使用Serial.println()函数。在给定的代码中,Serial.begin(115200)函数已经初始化了串口通信,并设置了波特率为115200。在loop()函数中,您可以添加Serial.println()语句来输出数字。例如,您可以在buttonState的输出语句后面添加一行代码Serial.println(buttonState)来持续输出按钮状态的数字值。这样,当按钮状态发生变化时,Arduino将会通过串口输出相应的数字值。
#### 引用[.reference_title]
- *1* *2* *3* [【ESP32最全学习笔记(基础篇)——5.ESP32 数字输入和数字输出(Arduino IDE)】](https://blog.csdn.net/m0_46509684/article/details/129108845)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v91^insertT0,239^v3^insert_chatgpt"}} ] [.reference_item]
[ .reference_list ]
相关问题
将数字信号转换为模拟信号的例程arduino
在Arduino上将数字信号转换为模拟信号有多种方法,其中一种常见的方法是使用PWM(脉冲宽度调制)技术。下面是一个简单的Arduino例程,演示如何使用PWM将数字信号转换为模拟信号:
```cpp
// 定义数字引脚和模拟输出引脚
const int digitalPin = 3; // 数字输入引脚
const int analogPin = 9; // 模拟输出引脚
void setup() {
pinMode(digitalPin, INPUT); // 设置数字引脚为输入模式
pinMode(analogPin, OUTPUT); // 设置模拟输出引脚为输出模式
}
void loop() {
int digitalValue = digitalRead(digitalPin); // 读取数字输入引脚的值(0或1)
int analogValue = map(digitalValue, 0, 1, 0, 255); // 将数字值映射到0-255的范围
analogWrite(analogPin, analogValue); // 将模拟值输出到模拟输出引脚
delay(10); // 延时一段时间,可根据需要调整
}
```
在此例程中,我们将一个数字输入信号连接到`digitalPin`引脚上,并将一个LED或其他模拟输出设备连接到`analogPin`引脚上。
`digitalRead()`函数用于读取数字输入引脚的值,返回0或1。`map()`函数用于将数字值映射到0-255的范围,这是PWM输出的范围。然后,使用`analogWrite()`函数将模拟值输出到模拟输出引脚。
通过不断循环,Arduino将持续读取数字输入引脚的值,并将对应的模拟值输出到模拟输出引脚,从而实现数字信号转换为模拟信号的功能。
请注意,这只是一个简单的例程,具体的实现方式可能会根据具体需要进行调整。此外,PWM输出的分辨率为8位(0-255),如果需要更高的分辨率,可能需要使用其他技术或外部模块。
arduino电子琴
Arduino电子琴的原理是将电平输出转化为相应的频率,从而使无源音响发出不同的声音。最简单的方法是直接将一首曲目的电平用程序传给单片机执行。为了创造出“电子琴”,只需要把相应的音阶变成bool电路,然后将它们连接到Arduino的数字引脚上。在Arduino IDE中编写程序,将每个按键与一个数字引脚相连,当按键按下时,数字引脚输出高电平,从而使相应的音调发出声音。此外,还可以通过连接LED灯和蜂鸣器来增加电子琴的效果。
以下是一个简单的Arduino电子琴的示例代码:
```arduino
int speakerPin = 8; // 声音输出引脚
int buttonPin = 2; // 按钮输入引脚
void setup() {
pinMode(speakerPin, OUTPUT);
pinMode(buttonPin, INPUT_PULLUP);
}
void loop() {
if (digitalRead(buttonPin) == LOW) { // 如果按钮按下
tone(speakerPin, 440); // 发出440Hz的声音
delay(500); // 延迟500毫秒
noTone(speakerPin); // 停止发声
}
}
```
在上面的代码中,我们将声音输出引脚设置为8,将按钮输入引脚设置为2。在setup()函数中,我们将声音输出引脚设置为输出模式,将按钮输入引脚设置为上拉输入模式。在loop()函数中,我们检测按钮是否按下,如果按下,则发出440Hz的声音,持续500毫秒,然后停止发声。
相关推荐
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)