led跑马灯代码keil
时间: 2024-06-11 14:01:36 浏览: 15
当然可以!以下是一个基于Keil的LED跑马灯代码示例:
```c
#include <reg51.h>
#define LED_PORT P1
void delay(unsigned int time) {
unsigned int i, j;
for (i = 0; i < time; i++)
for (j = 0; j < 125; j++);
}
void main() {
unsigned char pattern = 0x01;
while (1) {
LED_PORT = pattern;
delay(1000); // 延时1秒
pattern <<= 1;
if (pattern == 0x00)
pattern = 0x01;
}
}
```
这段代码使用了Keil C51编译器,通过控制P1口的输出来控制LED灯的亮灭。代码中的`delay`函数用于延时,`main`函数中的循环不断改变`pattern`变量的值,从而实现LED灯的跑马灯效果。
相关问题
stm32跑马灯keil5代码
当然可以!下面是一个简单的STM32跑马灯的Keil5代码示例:
```c
#include "stm32f10x.h"
void delay(uint32_t time) {
while(time--);
}
int main(void) {
GPIO_InitTypeDef GPIO_InitStructure;
// 使能GPIOC的时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
// 配置GPIOC的引脚为推挽输出模式
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
while(1) {
// 点亮LED1
GPIO_SetBits(GPIOC, GPIO_Pin_0);
delay(1000000);
// 熄灭LED1,点亮LED2
GPIO_ResetBits(GPIOC, GPIO_Pin_0);
GPIO_SetBits(GPIOC, GPIO_Pin_1);
delay(1000000);
// 熄灭LED2,点亮LED3
GPIO_ResetBits(GPIOC, GPIO_Pin_1);
GPIO_SetBits(GPIOC, GPIO_Pin_2);
delay(1000000);
// 熄灭LED3,点亮LED4
GPIO_ResetBits(GPIOC, GPIO_Pin_2);
GPIO_SetBits(GPIOC, GPIO_Pin_3);
delay(1000000);
// 熄灭LED4
GPIO_ResetBits(GPIOC, GPIO_Pin_3);
delay(1000000);
}
}
```
这段代码使用了GPIOC的引脚0、1、2和3来控制四个LED灯的亮灭,通过循环实现了跑马灯效果。
stm32 keil5 pc13跑马灯 代码
以下是使用Keil uVision5编写的stm32 PC13跑马灯的示例代码:
```c
#include "stm32f10x.h"
int main(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* Enable GPIOC clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
/* Configure PC13 pin as push-pull output */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOC, &GPIO_InitStructure);
while (1)
{
GPIO_SetBits(GPIOC, GPIO_Pin_13); // PC13高电平,灯灭
Delay(0xFFFFF); // 延时
GPIO_ResetBits(GPIOC, GPIO_Pin_13); // PC13低电平,灯亮
Delay(0xFFFFF); // 延时
}
}
void Delay(__IO uint32_t nCount)
{
for(; nCount != 0; nCount--);
}
```
在上面的代码中,我们使用了GPIOC的PC13引脚来控制LED灯的亮灭。在主函数中,我们首先初始化了GPIOC的PC13引脚为推挽输出模式,然后通过不断执行高低电平的切换来实现跑马灯的效果。在延时函数Delay中,我们使用了一个简单的for循环来实现延时的功能。
注意:这个示例代码只是一个简单的演示,实际应用中需要考虑更多的因素,如稳定性、功耗等。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)