C语言如何去串口发送命令
时间: 2023-07-26 17:35:02 浏览: 73
在C语言中,要通过串口发送命令,需要使用串口通信库,如Windows下的WinAPI或Linux下的termios等。以下是在Linux下使用termios库进行串口通信的示例代码:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
int main()
{
int fd;
struct termios options;
// 打开串口
fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY);
if (fd == -1)
{
printf("Failed to open serial port.\n");
return -1;
}
// 配置串口
tcgetattr(fd, &options);
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
options.c_cflag |= CLOCAL | CREAD;
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~CRTSCTS;
tcsetattr(fd, TCSANOW, &options);
// 发送命令
char cmd[] = "AT+CGMI\r\n"; // AT指令
write(fd, cmd, strlen(cmd));
// 关闭串口
close(fd);
return 0;
}
```
以上代码打开了/dev/ttyS0串口设备,配置波特率为9600,发送了AT+CGMI命令,并最终关闭了串口设备。在实际应用中,需要将AT指令替换为具体的要发送的命令。