4.在串口初始化和中断服务函数中,配置串口接收中断的函数是那个?产生中断的中断线是哪个?过程中是有哪些寄存器的哪个有效位起到控制中断的作用?
时间: 2024-01-24 08:20:45 浏览: 20
串口接收中断的函数是USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState),其中USART_IT参数可以选择USART_IT_RXNE,表示开启USARTx接收中断。产生中断的中断线是USARTx_IRQn,其中x代表USART的编号。在USART中断服务函数中,通过读取USART_SR寄存器中的位USART_SR_RXNE来判断是否发生了接收中断,并且通过设置USART_CR1寄存器中的位USART_CR1_RXNEIE来开启接收中断。
相关问题
写一个stm32的外部中断程序,A0引脚接收到高电平时执行中断,串口输出一个字符串
好的,以下是一个基本的STM32外部中断程序,当A0引脚接收到高电平时,会触发中断并执行中断函数,在中断函数中会通过串口输出一个字符串。
```
#include "stm32f10x.h"
#include "stdio.h"
void EXTI0_IRQHandler(void)
{
if(EXTI_GetITStatus(EXTI_Line0) != RESET)
{
// A0引脚接收到高电平,触发中断
printf("External interrupt triggered!\r\n");
// 清除中断标志位
EXTI_ClearITPendingBit(EXTI_Line0);
}
}
int main()
{
// 初始化串口
// ...
// 初始化A0引脚为输入模式
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD; // 输入模式,下拉电阻
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 初始化外部中断
EXTI_InitTypeDef EXTI_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); // 使能AFIO时钟
GPIO_EXTILineConfig(GPIO_PortSourceGPIOA, GPIO_PinSource0); // 选择A0引脚作为中断源
EXTI_InitStructure.EXTI_Line = EXTI_Line0; // 中断线0,对应A0引脚
EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; // 中断模式
EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; // 上升沿触发
EXTI_InitStructure.EXTI_LineCmd = ENABLE; // 使能中断线
EXTI_Init(&EXTI_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQn; // 中断通道
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0x00; // 抢占优先级,这里设置最高
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0x00; // 子优先级,这里设置最高
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; // 使能中断通道
NVIC_Init(&NVIC_InitStructure);
while(1)
{
// 主循环
// ...
}
return 0;
}
```
STM32F407通过按键触发外部中断,用DMA方式从串口1发送一个100字节的信息
可以使用以下代码实现:
```c
#include "stm32f4xx.h"
#define BUFFER_SIZE 100
uint8_t buffer[BUFFER_SIZE] = "Hello, world!";
void USART1_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
USART_InitTypeDef USART_InitStruct;
NVIC_InitTypeDef NVIC_InitStruct;
// Enable clock for GPIOA and USART1
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
// Configure PA9 as USART1 TX
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStruct.GPIO_OType = GPIO_OType_PP;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// Connect PA9 to USART1_TX
GPIO_PinAFConfig(GPIOA, GPIO_PinSource9, GPIO_AF_USART1);
// Configure USART1
USART_InitStruct.USART_BaudRate = 115200;
USART_InitStruct.USART_WordLength = USART_WordLength_8b;
USART_InitStruct.USART_StopBits = USART_StopBits_1;
USART_InitStruct.USART_Parity = USART_Parity_No;
USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStruct.USART_Mode = USART_Mode_Tx;
USART_Init(USART1, &USART_InitStruct);
// Enable USART1 interrupt
NVIC_InitStruct.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStruct);
// Enable USART1
USART_Cmd(USART1, ENABLE);
}
void EXTI0_IRQHandler(void)
{
if (EXTI_GetITStatus(EXTI_Line0) != RESET)
{
// Disable EXTI0 interrupt
EXTI_ClearITPendingBit(EXTI_Line0);
EXTI->IMR &= ~EXTI_Line0;
// Enable DMA1 clock
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA1, ENABLE);
// Configure DMA1 Stream 4
DMA_InitTypeDef DMA_InitStruct;
DMA_StructInit(&DMA_InitStruct);
DMA_InitStruct.DMA_Channel = DMA_Channel_4;
DMA_InitStruct.DMA_PeripheralBaseAddr = (uint32_t)&USART1->DR;
DMA_InitStruct.DMA_Memory0BaseAddr = (uint32_t)buffer;
DMA_InitStruct.DMA_DIR = DMA_DIR_MemoryToPeripheral;
DMA_InitStruct.DMA_BufferSize = BUFFER_SIZE;
DMA_InitStruct.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStruct.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStruct.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStruct.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStruct.DMA_Mode = DMA_Mode_Normal;
DMA_InitStruct.DMA_Priority = DMA_Priority_High;
DMA_InitStruct.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStruct.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
DMA_InitStruct.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStruct.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(DMA1_Stream4, &DMA_InitStruct);
// Enable DMA1 Stream 4 transfer complete interrupt
DMA_ITConfig(DMA1_Stream4, DMA_IT_TC, ENABLE);
// Enable DMA1 Stream 4
DMA_Cmd(DMA1_Stream4, ENABLE);
}
}
void DMA1_Stream4_IRQHandler(void)
{
if (DMA_GetITStatus(DMA1_Stream4, DMA_IT_TCIF4) != RESET)
{
// Disable DMA1 Stream 4
DMA_Cmd(DMA1_Stream4, DISABLE);
// Clear DMA1 Stream 4 transfer complete interrupt flag
DMA_ClearITPendingBit(DMA1_Stream4, DMA_IT_TCIF4);
// Enable EXTI0 interrupt
EXTI->IMR |= EXTI_Line0;
}
}
int main(void)
{
// Enable clock for GPIOA and SYSCFG
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
// Configure PA0 as EXTI0
GPIO_InitTypeDef GPIO_InitStruct;
EXTI_InitTypeDef EXTI_InitStruct;
NVIC_InitTypeDef NVIC_InitStruct;
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStruct);
SYSCFG_EXTILineConfig(EXTI_PortSourceGPIOA, EXTI_PinSource0);
EXTI_InitStruct.EXTI_Line = EXTI_Line0;
EXTI_InitStruct.EXTI_Mode = EXTI_Mode_Interrupt;
EXTI_InitStruct.EXTI_Trigger = EXTI_Trigger_Rising;
EXTI_InitStruct.EXTI_LineCmd = ENABLE;
EXTI_Init(&EXTI_InitStruct);
NVIC_InitStruct.NVIC_IRQChannel = EXTI0_IRQn;
NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority = 0x00;
NVIC_InitStruct.NVIC_IRQChannelSubPriority = 0x00;
NVIC_InitStruct.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStruct);
// Initialize USART1
USART1_Init();
while (1)
{
// Do nothing
}
}
```
这段代码实现了通过按键触发外部中断,用DMA方式从串口1发送一个100字节的信息。具体实现过程如下:
1. 初始化USART1,配置PA9为USART1_TX,使能USART1,使能USART1的发送中断。
2. 初始化PA0为EXTI0,使能EXTI0的中断。
3. 在EXTI0的中断处理函数中,禁用EXTI0的中断,使能DMA1的时钟,配置DMA1 Stream 4,使能DMA1 Stream 4的传输完成中断,使能DMA1 Stream 4。
4. 在DMA1 Stream 4的传输完成中断处理函数中,禁用DMA1 Stream 4,清除DMA1 Stream 4的传输完成中断标志,使能EXTI0的中断。
注意:在使用DMA发送数据时,需要先使能DMA的时钟,并配置DMA的通道、外设地址、内存地址、传输方向、传输数据长度等参数。在传输完成后,需要禁用DMA,并清除传输完成中断标志。在使用外部中断时,需要先初始化外部中断的GPIO和EXTI,并使能外部中断的中断线。在中断处理函数中,需要禁用外部中断的中断线,并在处理完成后重新使能外部中断的中断线。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)