#include <ioCC2530.h> #define unit unsigned int #define LED1 P1_0 #define LED2 P1_1 #define LED3 P1_4 #define LED4 P0_1 #define KEY P0_5 #define ON 1 #define OFF 0 void delay(unit n) { unit i; for(i=0;i<n;i++); } int main() { P1SEL &=0XF8; P0SEL &=0XFD; P0SEL &=0XDF; P1DIR |=0X13; P0DIR |=0X02; P0DIR &=0XDF; P0INP &=0XDF; EA = 1; IEN1 |= 0X20; P0IEN |= 0x20; PICTL |= 0x01; LED1 = OFF; LED2 = OFF; LED3 = OFF; LED4 = OFF; while(1) { delay(0xFFFF); } }解释一下代码
时间: 2023-06-16 17:05:01 浏览: 94
这是一个基于CC2530芯片的嵌入式系统的代码,主要实现了以下功能:
1. 定义了一些宏,如LED和KEY的引脚号以及开关状态;
2. 实现了一个延时函数delay(),用于延时一段时间;
3. 在main()函数中对芯片的引脚进行设置,将LED和KEY的引脚号设置为输出或输入,并将LED的初始状态设置为关闭;
4. 开启中断,当KEY按下时触发中断,中断服务程序中将LED的状态取反;
5. 在主函数中进行一个无限循环,每次循环延时一段时间。
总的来说,这个代码实现了一个简单的按键控制LED灯的功能。当按下按键时,LED的状态会取反,一直循环执行这个操作。
相关问题
用cc2530单片机实现以下功能: 在#include "ioCC2530.h" #include <string.h> #define UART_TX_BUF_SIZE 64 unsigned char uart_tx_buf[UART_TX_BUF_SIZE]; void uart_init(void) { PERCFG |= 0x00; P0SEL |= 0x0C; P2DIR |= 0x01; P2SEL &= ~0x01; P2_0 = 0; U0CSR |= 0x80; U0GCR |= 11; U0BAUD = 216; } void uart_send_str(const char *str) { unsigned int len = strlen(str); if (len > UART_TX_BUF_SIZE - 1) { len = UART_TX_BUF_SIZE - 1; } memcpy(uart_tx_buf, str, len); uart_tx_buf[len] = '\0'; for (int i = 0; i < len; i++) { U0DBUF = uart_tx_buf[i]; while (!(U0CSR & 0x20)); } } int main(void) { uart_init(); for (int i = 0; i < 5; i++) { uart_send_str("安徽工商职业学院\\n"); } P2_0 = 1; while (1); return 0; }优化为 1.通过串口调试助手,在串口调试助手界面上显示“安徽工商职业学院” 2.字样“安徽工商职业学院”在调试助手界面上显示5次后停止显示。
根据你的要求,我可以给出以下优化方案:
1. 修改 uart_send_str 函数,直接发送字符串 "安徽工商职业学院\n",不需要使用缓存区。
```c
void uart_send_str(const char *str) {
while (*str != '\0') {
U0DBUF = *str++;
while (!(U0CSR & 0x20));
}
}
```
2. 在主函数中使用循环发送 5 次字符串 "安徽工商职业学院\n"。
```c
int main(void) {
uart_init();
for (int i = 0; i < 5; i++) {
uart_send_str("安徽工商职业学院\n");
}
while (1);
return 0;
}
```
这样就可以在串口调试助手界面上显示 5 次 "安徽工商职业学院" 字符串了。
解释这段代码#include "ioCC2530.h" #include <string.h> #define LED1 P1_0 #define uint16 unsigned short #define uint32 unsigned long #define uint unsigned int unsigned int flag,counter=0; unsigned char s[8]; void InitLED() { P1SEL &= ~0x01; P1DIR |= 0x01; LED1 = 0; } void adc_Init(void) { APCFG |= 1; P0SEL |= 0x01; P0DIR &= ~0x01; } uint16 get_adc(void) { uint32 value; ADCIF = 0; ADCCON3 = (0x80 | 0x10 |0x00); while(!ADCIF) { ; } value = ADCH; value = value<<8; value |=ADCL; value = (value * 330); value = value >> 15; return (uint16)value; } void initUART0(void) { PERCFG = 0x00; P0SEL = 0x3c; U0CSR |= 0x80; U0BAUD = 216; U0GCR = 10; U0UCR |=0x80; UTX0IF = 0; EA = 1; } void initTimer1() { CLKCONCMD &= 0x80; T1CTL = 0x0E; T1CCTL0 |= 0x04; T1CC0L = 50000 & 0xFF; T1CC0H = ((50000 & 0xFF00) >> 8); T1IF = 0; T1STAT &= ~0x01; TIMIF &= ~0x40; IEN1 |= 0x02; EA = 1; } void UART0SendByte(unsigned char c) { U0DBUF = c; while(!UTX0IF); UTX0IF = 0; } void UART0SendString(unsigned char *str) { while(*str != '\0') { UART0SendByte(*str++); } } void Get_val() { uint16 sensor_val; sensor_val = get_adc(); s[0] = sensor_val/100+'0'; s[1] = '.'; s[2] = sensor_val/10%10+'0'; s[3] = sensor_val%10+'0'; s[4] = 'V'; s[5] = '\n'; s[6] = '\0'; } #pragma vector = T1_VECTOR __interrupt void T1_ISR(void) { EA = 0; counter++; T1STAT &= ~0x01; EA = 1; } void main(void) { InitLED(); initTimer1(); initUART0(); adc_Init(); while(1) { if(counter>=15) { counter=0; LED1 = 1; Get_val(); UART0SendString("光照传感器电压值"); UART0SendString(s); LED1 = 0; } } }
这是一段基于CC2530芯片的嵌入式系统的代码。这段代码主要实现了以下功能:
1. 通过ADC采集光照传感器的电压值。
2. 通过UART0将采集的电压值发送到串口终端。
3. 使用定时器控制LED闪烁,每隔一定时间发送一次电压值。
具体实现过程如下:
1. 初始化LED、ADC、UART0和定时器。
2. 在while(1)循环中,通过计数器控制LED的闪烁,每隔一定时间(15个定时器中断周期)发送一次电压值。
3. 在定时器中断服务函数T1_ISR中,更新计数器的值,清除定时器中断标志位。
4. 在Get_val函数中,通过ADC采集光照传感器的电压值,并将其转换为字符串格式,并存储在s数组中。
5. 在UART0SendString函数中,将字符串通过UART0发送到串口终端。
总体来说,这段代码是一个简单的嵌入式系统的实现,通过采集传感器数据并将其通过串口发送给终端,实现了数据的实时监测和传输。
相关推荐
![h](https://img-home.csdnimg.cn/images/20210720083646.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)