stm32ch340串口驱动安装
时间: 2023-11-11 18:59:41 浏览: 81
安装 STM32 CH340 串口驱动的步骤如下:
1. 下载 CH340 驱动程序,可以在官网或者其他第三方网站下载。
2. 解压下载的驱动程序,找到对应操作系统的驱动程序安装文件。
3. 双击安装文件,按照提示完成安装过程。
4. 将 STM32 开发板通过 USB 线连接到电脑上,此时电脑会自动识别并安装 CH340 驱动程序。
5. 在开发环境中选择正确的串口号和波特率,即可开始使用串口进行通信。
相关问题
stm32ch340串口驱动
对于stm32和ch340之间的串口通信,需要在stm32的代码中使用串口库函数进行配置和使用。具体步骤如下:
1. 配置GPIO引脚,将其设置为串口模式。
2. 配置串口参数,包括波特率、数据位、停止位、校验位等。
3. 初始化串口,并使能串口中断(如果需要)。
4. 在代码中使用串口发送和接收数据。
以下是一个简单的示例代码,用于在stm32和ch340之间进行串口通信:
```c
#include "stm32f10x.h"
#include "stdio.h"
void USART1_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
USART_InitTypeDef USART_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
USART_InitStructure.USART_BaudRate = 9600;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
USART_Init(USART1, &USART_InitStructure);
NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
USART_Cmd(USART1, ENABLE);
}
void USART1_IRQHandler(void)
{
if (USART_GetITStatus(USART1, USART_IT_RXNE) != RESET)
{
char ch = USART_ReceiveData(USART1);
USART_SendData(USART1, ch);
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
USART_ClearITPendingBit(USART1, USART_IT_RXNE);
}
}
int main(void)
{
USART1_Init();
while (1)
{
// 发送数据
USART_SendData(USART1, 'A');
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
// 接收数据
while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET);
char ch = USART_ReceiveData(USART1);
}
}
```
stm32ch340串口驱动烧录
根据引用的内容,使用STM32的CH340模块进行串口驱动烧录时可能会遇到一些问题。首先,确保供电正常,并且已安装CH340的驱动程序。其次,确保串口转TTL模块的连接线是好的,并且RX与TX连接正确。另外,要将下载模式设置为烧录模式,即将BOOT0设置为高电平,BOOT1设置为低电平。同时,还需要正确设置FlyMcu软件中的串口、波特率、选项字节区等参数。如果使用的是买的USB转TTL模块,请选择正确的模块。另外,根据实际硬件选择相应的配置,比如不使用RTS和DTR或者使用DTR的低电平复位和RTS高电平进入BootLoader。如果遇到连接超时、芯片无应答等情况,还可以尝试使用SWD接口调试下载程序。综上所述,根据这些注意事项来操作,应该可以解决STM32使用CH340进行串口驱动烧录的问题。<span class="em">1</span><span class="em">2</span><span class="em">3</span>
#### 引用[.reference_title]
- *1* *2* *3* [flyMcu给STM32串口烧录失败踩坑、总结及注意事项](https://blog.csdn.net/weixin_44147894/article/details/107682457)[target="_blank" data-report-click={"spm":"1018.2226.3001.9630","extra":{"utm_source":"vip_chatgpt_common_search_pc_result","utm_medium":"distribute.pc_search_result.none-task-cask-2~all~insert_cask~default-1-null.142^v92^chatsearchT0_1"}}] [.reference_item style="max-width: 100%"]
[ .reference_list ]
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)