我的要求是计时30秒期间,我按下按键,小灯也熄灭
时间: 2024-03-22 14:42:01 浏览: 24
非常抱歉,我理解有误。要实现您的要求,可以在按下按键时将一个标志位置为1,在计时30秒期间检测该标志是否为1,如果为1则将小灯熄灭。
以下是修改后的代码:
```c
#include <msp430.h>
#define LED BIT2
#define BUTTON BIT0
volatile unsigned int count = 0;
volatile unsigned char flag = 0;
void main(void)
{
WDTCTL = WDTPW + WDTHOLD; // 停用看门狗定时器
P1DIR |= LED; // 使P1.2引脚输出
P7DIR &= ~BUTTON; // 使P7.0引脚输入
P7REN |= BUTTON; // 使P7.0引脚启用上拉电阻
P7OUT |= BUTTON; // 使P7.0引脚上拉
TA0CCTL0 = CCIE; // 使定时器TA0的CCR0中断使能
TA0CCR0 = 32768; // 设置定时器TA0的CCR0值,使其产生1秒的中断
TA0CTL = TASSEL_1 + MC_1; // 选择ACLK作为定时器TA0的时钟源,选择增计数模式
__enable_interrupt(); // 使总中断开关打开
while (1)
{
if ((P7IN & BUTTON) == 0) // 如果按键按下
{
count = 30; // 将计数器赋值为30
P1OUT |= LED; // 使LED引脚输出高电平
flag = 0; // 将标志位清零
}
if (count == 0) // 如果计数器为0
{
P1OUT &= ~LED; // 使LED引脚输出低电平
flag = 0; // 将标志位清零
}
if (flag == 1) // 如果标志位为1
{
P1OUT &= ~LED; // 使LED引脚输出低电平
flag = 0; // 将标志位清零
}
}
}
#pragma vector=TIMER0_A0_VECTOR // 定时器TA0的CCR0中断服务函数
__interrupt void Timer_A(void)
{
if (count > 0) // 如果计数器大于0
{
count--; // 计数器减1
}
}
#pragma vector=PORT7_VECTOR // P7端口中断服务函数
__interrupt void Port_7(void)
{
if ((P7IFG & BUTTON) == BUTTON) // 如果是P7.0引脚触发的中断
{
flag = 1; // 将标志位设置为1
P7IFG &= ~BUTTON; // 清除P7.0引脚的中断标志位
}
}
```
在按下按键时,将标志位flag设置为0,在计时30秒期间检测该标志是否为1,如果为1则将小灯熄灭。同时,增加了P7端口的中断服务函数,用于检测按键是否被按下。
希望这次能够满足您的要求。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)