SD卡模块在STM32F407例程
时间: 2024-04-08 20:30:59 浏览: 20
以下是一个简单的示例代码,演示如何在STM32F407上使用SD卡模块:
```c
#include "stm32f4xx.h"
#include "stm32f4xx_sdio.h"
#include "stm32f4xx_rcc.h"
#include "stm32f4xx_gpio.h"
void SDIO_Configuration(void)
{
SDIO_InitTypeDef SDIO_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
// 使能SDIO时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SDIO, ENABLE);
// 使能SDIO相关GPIO时钟
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOD, ENABLE);
// 配置SDIO的D2-D3引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(GPIOD, &GPIO_InitStructure);
// 配置SDIO的CMD引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2;
GPIO_Init(GPIOC, &GPIO_InitStructure);
// 配置SDIO的CK引脚
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_Init(GPIOC, &GPIO_InitStructure);
// 配置SDIO引脚复用功能
GPIO_PinAFConfig(GPIOD, GPIO_PinSource8, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOD, GPIO_PinSource9, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOD, GPIO_PinSource10, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOD, GPIO_PinSource11, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOD, GPIO_PinSource12, GPIO_AF_SDIO);
GPIO_PinAFConfig(GPIOC, GPIO_PinSource2, GPIO_AF_SDIO);
// SDIO配置
SDIO_InitStructure.SDIO_ClockDiv = SDIO_CKCKDIV_2; // SDIO时钟分频系数为2
SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; // SDIO时钟上升沿有效
SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; // 不绕过SDIO时钟
SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; // 不使能SDIO时钟节能模式
SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; // 数据总线宽度为1位
SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; // 不使能硬件流控制
SDIO_Init(&SDIO_InitStructure);
// 使能SDIO功能
SDIO_Cmd(ENABLE);
}
int main(void)
{
// 初始化SDIO配置
SDIO_Configuration();
while (1)
{
// 在这里执行其他操作
}
}
```
这个例程假设你已经将SD卡模块连接到STM32F407的相应引脚上,并且已经正确配置了时钟和IO口。你可以根据实际情况修改引脚和时钟配置。
此外,你还需要在STM32F4xx标准外设库中添加SDIO驱动库,并在编译选项中包含相应的头文件和库文件。
请注意,这只是一个简单的示例代码,你可能需要根据具体的SD卡模块和应用需求进行适当的修改。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)