stm32中断方式如何判断按键按下
时间: 2023-12-02 16:02:41 浏览: 71
在STM32中,可以通过外部中断(EXTI)来判断按键是否按下。具体步骤如下:
1. 配置按键对应的GPIO口为中断输入模式。
2. 配置EXTI线路对应的GPIO口(即步骤1中配置的GPIO口)和中断触发方式。
3. 在中断服务函数中检测EXTI线路的中断标志位是否被置位,如果被置位说明按键被按下。
例如,以下代码展示了如何在STM32中使用外部中断来判断按键是否按下:
```c
// 1. 配置按键对应的GPIO口为中断输入模式
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = GPIO_PIN_0;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLUP;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
// 2. 配置EXTI线路对应的GPIO口和中断触发方式
HAL_NVIC_SetPriority(EXTI0_IRQn, 0, 0);
HAL_NVIC_EnableIRQ(EXTI0_IRQn);
HAL_GPIO_WritePin(GPIOA, GPIO_PIN_0, GPIO_PIN_SET);
static uint8_t key_pressed = 0;
// 3. 中断服务函数
void EXTI0_IRQHandler(void) {
if (__HAL_GPIO_EXTI_GET_IT(GPIO_PIN_0) != RESET) {
__HAL_GPIO_EXTI_CLEAR_IT(GPIO_PIN_0);
key_pressed = 1;
}
}
int main(void) {
while (1) {
if (key_pressed) {
// 执行按键按下后的操作
key_pressed = 0;
}
}
}
```
在这个例子中,我们将PA0口配置为中断输入模式,并启用了外部中断。在中断服务函数中,我们检测到了PA0口的中断标志位被置位,说明按键被按下了,于是将key_pressed标志位置为1。在主函数中,我们不断检查key_pressed标志位,如果被置位则执行按键按下后的操作。
相关推荐
![7z](https://img-home.csdnimg.cn/images/20210720083312.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)