设置硬件串口缓冲区大小的代码C语言
时间: 2023-06-02 09:01:39 浏览: 79
在C语言中,可以使用以下代码来设置硬件串口缓冲区大小:
```c
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <termios.h>
int main()
{
int fd;
struct termios options;
fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY | O_NDELAY);
if (fd == -1)
{
printf("Unable to open serial port\n");
exit(1);
}
fcntl(fd, F_SETFL, 0);
tcgetattr(fd, &options);
// Set input and output baud rates
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
// Set input and output buffer sizes
options.c_cc[VMIN] = 1;
options.c_cc[VTIME] = 0;
tcsetattr(fd, TCSANOW, &options);
close(fd);
return 0;
}
```
在上面的代码中,我们首先打开了串口设备文件`/dev/ttyS0`,然后使用`tcgetattr()`函数获取当前串口的配置参数。接下来,我们设置了输入和输出的波特率为9600,并设置了输入和输出缓冲区的大小。最后,我们使用`tcsetattr()`函数将新的配置参数应用到串口上,并关闭了串口设备文件。
在设置输入和输出缓冲区大小时,我们使用了`options.c_cc[VMIN]`和`options.c_cc[VTIME]`两个选项。`VMIN`选项指定了在读取输入时需要等待的最小字节数,而`VTIME`选项指定了在读取输入时需要等待的最长时间(以十分之一秒为单位)。在上面的代码中,我们将`VMIN`设置为1,表示在读取输入时需要等待至少1个字节;将`VTIME`设置为0,表示不需要等待时间,只要有数据就立即返回。
需要注意的是,不同的操作系统和串口设备可能对缓冲区大小的设置方式有所不同。在使用上面的代码时,可能需要根据具体情况进行调整。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)