Transmission_UART
时间: 2023-07-24 15:14:14 浏览: 47
UART(Universal Asynchronous Receiver/Transmitter)是一种通用的异步收发器,用于在计算机系统和外部设备之间进行串行通信。它是一种常见的串行通信接口,常用于连接微控制器、传感器、显示屏、调试工具等外部设备。
UART通过发送和接收数据帧来进行通信。数据帧由起始位、数据位、校验位和停止位组成。起始位表示数据帧的开始,数据位用于传输实际数据,校验位用于检测数据的完整性,停止位表示数据帧的结束。
通过UART,计算机系统可以向外部设备发送数据,并从外部设备接收数据。它使用一条通信线路进行双向通信,其中包括一个传输线用于发送数据和一个接收线用于接收数据。
在传输数据时,UART使用的是异步通信方式,即发送和接收的时钟不同步。这意味着发送端和接收端的时钟频率可以不同,但数据传输仍然可靠。
总结来说,UART是一种常用的串行通信接口,用于计算机系统与外部设备之间的数据传输。它通过异步通信方式实现双向数据传输,并使用起始位、数据位、校验位和停止位组成数据帧。
相关问题
mcu_uart_working = gpio_read(GPIO_WAKEUP_MODULE); //mcu use GPIO_WAKEUP_MODULE to indicate the UART data transmission or receiving state module_uart_working = UART_TX_BUSY || UART_RX_BUSY; //module checks to see if UART rx and tX are all processed module_task_busy = mcu_uart_working || module_uart_working; return module_task_busy;
这段代码的作用是检查模块是否正在进行UART数据传输或接收,并且返回一个布尔值来指示模块任务是否繁忙。其中,第一行代码使用GPIO_WAKEUP_MODULE读取MCU对UART数据传输或接收状态的指示,并将其赋值给mcu_uart_working变量。第二行代码检查UART的发送和接收是否正在进行,并将结果赋值给module_uart_working变量。第三行代码将mcu_uart_working和module_uart_working变量进行逻辑或运算,得到模块任务是否繁忙的结果,并将其赋值给module_task_busy变量。最后一行代码返回module_task_busy变量的值。
HAL_UART_Transmit
HAL_UART_Transmit function is a function provided by the HAL (Hardware Abstraction Layer) library in the STM32 microcontroller series. This function is used to transmit data from the microcontroller to a connected device via the UART (Universal Asynchronous Receiver/Transmitter) interface.
The function takes four parameters:
- UART handle: This is a pointer to a UART_HandleTypeDef structure which contains the configuration parameters for the UART.
- Data buffer: This is a pointer to the buffer containing the data to be transmitted.
- Data length: This is the number of bytes to be transmitted.
- Timeout: This is the maximum amount of time to wait for the transmission to complete, specified in milliseconds.
The function returns an HAL_StatusTypeDef value indicating the status of the transmission. The possible return values are HAL_OK, HAL_ERROR, HAL_BUSY, and HAL_TIMEOUT.
Example usage:
```
uint8_t data[] = "Hello World!";
uint16_t length = strlen(data);
HAL_UART_Transmit(&huart2, data, length, 1000);
```
This example transmits the string "Hello World!" via the UART interface connected to UART2. The maximum time to wait for the transmission to complete is 1000 ms.
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)