请判断下面几个函数中,哪些能与 void f1(int x,char h,float d=1.of){…}成为重载函数? 并说明原因。
时间: 2023-06-15 15:06:34 浏览: 88
1. `void f1(int x,char h,float d){...}` 可以成为重载函数。原因是参数列表中的第三个参数类型不同于原函数的默认参数类型。
2. `void f1(int x,char h,double d=1.0){...}` 可以成为重载函数。原因是参数列表中的第三个参数类型不同于原函数的默认参数类型。
3. `void f1(float x,char h,float d=1.0f){...}` 可以成为重载函数。原因是参数列表中的第一个参数类型不同于原函数的参数类型。
4. `void f1(int x,char h){...}` 不能成为重载函数。原因是参数列表与原函数完全相同,没有任何区别。
相关问题
请写出一段代码用STM32f1单片机实现对方波信号的频率测量并且将频率显示在lcd屏幕上
以下代码基于STM32F103C8T6单片机,使用TIM2来捕获对方波信号的上升沿和下降沿,通过计算两个时间差来得到频率,最后将频率显示在LCD屏幕上。
```c
#include "stm32f10x.h"
#include "stm32f10x_gpio.h"
#include "stm32f10x_rcc.h"
#include "stm32f10x_tim.h"
#include "delay.h"
#include "lcd.h"
int main(void)
{
uint16_t capture1 = 0;
uint16_t capture2 = 0;
float frequency = 0;
char freq_str[16];
// 初始化系统时钟为72MHz
SystemInit();
// 初始化延时函数
delay_init();
// 初始化LCD屏幕
LCD_Init();
// 初始化TIM2
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
TIM_TimeBaseInitTypeDef TIM_TimeBaseInitStruct;
TIM_TimeBaseInitStruct.TIM_Prescaler = 72 - 1;
TIM_TimeBaseInitStruct.TIM_Period = 0xFFFF;
TIM_TimeBaseInitStruct.TIM_ClockDivision = 0;
TIM_TimeBaseInitStruct.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseInitStruct);
// 初始化TIM2通道1和通道2用于捕获对方波信号
TIM_ICInitTypeDef TIM_ICInitStruct;
TIM_ICInitStruct.TIM_Channel = TIM_Channel_1;
TIM_ICInitStruct.TIM_ICPolarity = TIM_ICPolarity_Rising;
TIM_ICInitStruct.TIM_ICSelection = TIM_ICSelection_DirectTI;
TIM_ICInitStruct.TIM_ICPrescaler = TIM_ICPSC_DIV1;
TIM_ICInitStruct.TIM_ICFilter = 0;
TIM_ICInit(TIM2, &TIM_ICInitStruct);
TIM_ICInitStruct.TIM_Channel = TIM_Channel_2;
TIM_ICInitStruct.TIM_ICPolarity = TIM_ICPolarity_Falling;
TIM_ICInitStruct.TIM_ICSelection = TIM_ICSelection_IndirectTI;
TIM_ICInitStruct.TIM_ICPrescaler = TIM_ICPSC_DIV1;
TIM_ICInitStruct.TIM_ICFilter = 0;
TIM_ICInit(TIM2, &TIM_ICInitStruct);
// 启动TIM2计数器
TIM_Cmd(TIM2, ENABLE);
while (1)
{
// 等待第一个捕获事件的发生
while (TIM_GetFlagStatus(TIM2, TIM_FLAG_CC1) == RESET);
// 记录第一个捕获事件的时间
capture1 = TIM_GetCapture1(TIM2);
// 清除第一个捕获事件的标志位
TIM_ClearFlag(TIM2, TIM_FLAG_CC1);
// 等待第二个捕获事件的发生
while (TIM_GetFlagStatus(TIM2, TIM_FLAG_CC2) == RESET);
// 记录第二个捕获事件的时间
capture2 = TIM_GetCapture2(TIM2);
// 清除第二个捕获事件的标志位
TIM_ClearFlag(TIM2, TIM_FLAG_CC2);
// 计算频率并将结果转换为字符串
frequency = (float)72000000 / (float)(capture2 - capture1);
sprintf(freq_str, "Freq: %.2f Hz", frequency);
// 在LCD屏幕上显示频率
LCD_Clear();
LCD_WriteString(0, 0, freq_str);
// 延时一段时间
delay_ms(500);
}
}
```
我现在想用STM32F1正点原子的标准库做一个识别四个ds18b20并在lcd显示的代码
好的,你需要先准备以下硬件设备:
1. STM32F1开发板
2. DS18B20温度传感器 x 4
3. LCD显示屏
接下来,你需要完成以下步骤:
1. 在STM32F1开发板上引脚连接四个DS18B20传感器。具体的连接方式可以参考正点原子提供的资料和示例代码。
2. 在开发板上连接LCD显示屏。同样,具体的连接方式可以参考正点原子提供的资料和示例代码。
3. 配置STM32F1开发板的GPIO口为输入输出模式。具体的GPIO配置方式可以参考正点原子提供的资料和示例代码。
4. 使用正点原子提供的库函数读取DS18B20传感器的温度值,并将其显示在LCD上。具体的库函数和调用方式可以参考正点原子提供的资料和示例代码。
下面是一个简单的示例代码,可以实现识别四个DS18B20并在LCD上显示温度值:
```c
#include "stm32f10x.h"
#include "ds18b20.h"
#include "lcd.h"
int main(void)
{
uint8_t sensor_count = 0;
float temp[4] = {0};
char str[16] = {0};
// 初始化GPIO口
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// 初始化LCD显示屏
LCD_Init();
LCD_Clear();
// 扫描DS18B20传感器
sensor_count = DS18B20_Scan();
// 读取温度值并在LCD上显示
while (1)
{
for (int i = 0; i < sensor_count; i++)
{
DS18B20_ReadTemp(temp[i], i);
sprintf(str, "Sensor %d: %.2f C", i, temp[i]);
LCD_ShowString(0, i * 16, str);
}
}
}
```
该示例代码中,我们首先初始化了GPIO口和LCD显示屏,并调用了DS18B20_Scan()函数扫描了连接的DS18B20传感器。
接下来,我们进入了一个死循环,在循环体内使用DS18B20_ReadTemp()函数读取了四个传感器的温度值,并使用LCD_ShowString()函数将其显示在LCD上。
需要注意的是,以上示例代码中只给出了一个简单的框架,你需要根据实际情况对其进行修改和完善。
相关推荐
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![doc](https://img-home.csdnimg.cn/images/20210720083327.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)