stm32f10c8t6温湿度
时间: 2023-12-13 16:04:38 浏览: 41
为了实现stm32f10c8t6温湿度的读取,可以按照以下步骤进行:
1. 首先需要连接stm32f10c8t6和DHT11传感器。将DHT11的VCC引脚连接到stm32的3.3V电源引脚,将DHT11的GND引脚连接到stm32的GND引脚,将DHT11的数据引脚连接到stm32的B10引脚。
2. 接下来需要编写stm32的程序来读取DHT11传感器的数据。程序的主要思路是通过发送特定的信号给DHT11传感器,然后读取传感器返回的数据。具体实现可以参考以下代码:
```c
#include "dht11.h"
int main(void)
{
DHT11_Init(); // 初始化DHT11传感器
while (1)
{
DHT11_Read_Data(); // 读取DHT11传感器的数据
}
}
```
3. 在上述代码中,我们调用了DHT11_Init()函数来初始化DHT11传感器,然后在while循环中调用DHT11_Read_Data()函数来读取传感器的数据。具体的DHT11_Init()和DHT11_Read_Data()函数的实现可以参考以下代码:
```c
#include "dht11.h"
void DHT11_Init(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_SetBits(GPIOB, GPIO_Pin_10);
delay_ms(1000);
}
void DHT11_Read_Data(void)
{
uint8_t i, j, byte;
uint8_t data[5];
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_ResetBits(GPIOB, GPIO_Pin_10);
delay_ms(18);
GPIO_SetBits(GPIOB, GPIO_Pin_10);
delay_us(40);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPU;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOB, &GPIO_InitStructure);
while (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) == Bit_RESET);
while (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) == Bit_SET);
while (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) == Bit_RESET);
for (i = 0; i < 5; i++)
{
byte = 0;
for (j = 0; j < 8; j++)
{
while (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) == Bit_RESET);
delay_us(30);
if (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) == Bit_SET)
{
byte |= (1 << (7 - j));
}
while (GPIO_ReadInputDataBit(GPIOB, GPIO_Pin_10) == Bit_SET);
}
data[i] = byte;
}
if (data[4] == (data[0] + data[1] + data[2] + data[3]))
{
printf("Temperature: %d.%d C, Humidity: %d.%d %%\n", data[2], data[3], data[0], data[1]);
}
else
{
printf("Checksum error!\n");
}
delay_ms(2000);
}
```
4. 在上述代码中,我们定义了DHT11_Init()函数来初始化DHT11传感器的GPIO引脚,然后定义了DHT11_Read_Data()函数来读取传感器的数据。具体的读取过程可以参考上述代码中的注释。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)