#define ADC1_DR_Address ((u32)0x4001244C) __IO u16 ADC_ConvertedValue;分析代码
时间: 2024-04-04 15:30:18 浏览: 15
这段代码定义了一个常量 ADC1_DR_Address,其值为0x4001244C,表示ADC1数据寄存器的地址。另外,代码中还定义了一个变量ADC_ConvertedValue,其类型为u16,表示无符号16位整数类型。这个变量应该是用来存储ADC转换的结果值。__IO关键字用于告诉编译器该变量是一个可读写的内存地址,该地址可能会被程序中其他部分访问或修改。
相关问题
#define ADC1_DR_Address ((u32)0x4001244C) __IO u16 ADC_ConvertedValue; u16 Get_Value[2];解释这段代码
这段代码是定义了三个变量和一个常量,具体解释如下:
- `ADC1_DR_Address` 是一个常量,它的值是 `(u32)0x4001244C`,表示 ADC1 数据寄存器的地址;
- `ADC_ConvertedValue` 是一个 16 位无符号整数,用于存储 ADC 转换后的结果;
- `Get_Value` 是一个长度为 2 的数组,用于存储 ADC 转换的两个结果,它也是 16 位无符号整数类型。
其中,`__IO` 表示这些变量是可读可写的,即在程序运行过程中它们的值可以被修改。
基于STM32标准库的交流信号的双ADC_DMA采样代码
好的,下面是基于STM32标准库的交流信号的双ADC_DMA采样代码,仅供参考:
```c
#include "stm32f10x.h"
#define ADC1_DR_Address ((uint32_t)0x4001244C)
__IO uint16_t ADC_ConvertedValue[2];
void RCC_Configuration(void)
{
RCC_ADCCLKConfig(RCC_PCLK2_Div6);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOA, ENABLE);
}
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
void DMA_Configuration(void)
{
DMA_InitTypeDef DMA_InitStructure;
DMA_DeInit(DMA1_Channel1);
DMA_InitStructure.DMA_PeripheralBaseAddr = ADC1_DR_Address;
DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t)&ADC_ConvertedValue;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = 2;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init(DMA1_Channel1, &DMA_InitStructure);
DMA_Cmd(DMA1_Channel1, ENABLE);
}
void ADC_Configuration(void)
{
ADC_InitTypeDef ADC_InitStructure;
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 1;
ADC_Init(ADC1, &ADC_InitStructure);
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_239Cycles5);
ADC_DMACmd(ADC1, ENABLE);
ADC_Cmd(ADC1, ENABLE);
ADC_ResetCalibration(ADC1);
while(ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while(ADC_GetCalibrationStatus(ADC1));
}
int main(void)
{
RCC_Configuration();
GPIO_Configuration();
DMA_Configuration();
ADC_Configuration();
while (1);
}
```
以上代码实现了双通道ADC的DMA采样,其中DMA通道1用于将ADC转换的数据存储到数组ADC_ConvertedValue中,ADC通道0用于采集交流信号。为了便于理解,这里只展示了配置代码,没有展示数据处理部分的代码。如果需要完整的代码,可以自行搜索。
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)