copy_to_user和raw_copy_to_user的区别
时间: 2023-02-08 18:03:45 浏览: 186
copy_to_user和raw_copy_to_user是内核函数,它们的作用是将数据从内核空间复制到用户空间。
这两个函数的区别在于,raw_copy_to_user不会对复制的数据进行错误检查,而copy_to_user会进行错误检查。如果复制过程中发生错误,copy_to_user会返回错误码,而raw_copy_to_user不会。
通常情况下,在内核代码中应该使用copy_to_user,因为它能够检测并处理复制过程中的错误。然而,如果已经对复制的数据进行了检查,或者希望忽略复制过程中可能出现的错误,那么可以使用raw_copy_to_user。
相关问题
raw_copy_from_user copy_from_user 的区别
`copy_from_user` 和 `raw_copy_from_user` 是 Linux 内核中用于用户空间和内核空间之间数据传输的函数。
`copy_from_user` 函数是从用户空间复制数据到内核空间。它会将指定用户空间地址开始的一段数据复制到指定内核空间地址开始的相同大小的内存区域。这个函数会执行一些额外的校验和处理,如检查用户空间地址的合法性、处理页错误等。因此,如果需要从用户空间复制数据到内核空间时,应该使用 `copy_from_user` 函数。
`raw_copy_from_user` 函数也是从用户空间复制数据到内核空间,但是它不执行额外的校验和处理。它只是简单地将指定用户空间地址开始的一段数据复制到指定内核空间地址开始的相同大小的内存区域。由于不执行额外处理,因此在使用 `raw_copy_from_user` 函数时需要特别注意用户空间地址的合法性和错误处理。一般情况下,如果没有特殊需求,建议使用 `copy_from_user` 函数。
总结起来,`copy_from_user` 函数更安全可靠,适用于从用户空间复制数据到内核空间;而 `raw_copy_from_user` 函数更原始简洁,需要开发者自己保证用户空间地址的合法性和错误处理。
mtd_debug 命令源码
mtd_debug 命令是用于调试MTD驱动的命令,其源码可以在Linux内核源码中找到。具体路径为:drivers/mtd/tests/mtd_debug.c。
以下是 mtd_debug 命令的源码:
```
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
#include <linux/ctype.h>
static char mtd_buf[4096];
static int mtd_buf_size;
static ssize_t mtd_debug_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
int ret;
if (*ppos >= mtd_buf_size)
return 0;
if (count > mtd_buf_size - *ppos)
count = mtd_buf_size - *ppos;
ret = copy_to_user(buf, mtd_buf + *ppos, count);
if (ret)
return -EFAULT;
*ppos += count;
return count;
}
static ssize_t mtd_debug_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
int ret;
if (count >= sizeof(mtd_buf))
return -EINVAL;
ret = copy_from_user(mtd_buf, buf, count);
if (ret)
return -EFAULT;
mtd_buf_size = count;
return count;
}
static const struct file_operations mtd_debug_fops = {
.owner = THIS_MODULE,
.read = mtd_debug_read,
.write = mtd_debug_write,
};
static struct tty_driver *mtd_debug_tty_driver = NULL;
static int mtd_debug_open(struct inode *inode, struct file *file)
{
if (!try_module_get(THIS_MODULE))
return -ENODEV;
file->private_data = mtd_debug_tty_driver->driver_state;
return tty_open(inode, file);
}
static void mtd_debug_close(struct tty_struct *tty, struct file *file)
{
tty_driver_flush_buffer(tty);
module_put(THIS_MODULE);
tty_close(tty, file);
}
static int mtd_debug_write_room(struct tty_struct *tty)
{
return 65536;
}
static int mtd_debug_put_char(struct tty_struct *tty, unsigned char ch)
{
if (mtd_buf_size >= sizeof(mtd_buf))
return 0;
mtd_buf[mtd_buf_size++] = ch;
return 1;
}
static struct tty_operations mtd_debug_tty_ops = {
.open = mtd_debug_open,
.close = mtd_debug_close,
.write_room = mtd_debug_write_room,
.put_char = mtd_debug_put_char,
};
static struct tty_driver *mtd_debug_init_tty_driver(void)
{
struct tty_driver *driver;
driver = alloc_tty_driver(1);
if (!driver)
return NULL;
driver->owner = THIS_MODULE;
driver->driver_name = "mtd_debug";
driver->name = "mtd_debug";
driver->type = TTY_DRIVER_TYPE_SERIAL;
driver->subtype = SERIAL_TYPE_NORMAL;
driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_set_operations(driver, &mtd_debug_tty_ops);
driver->init_termios = tty_std_termios;
driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
tty_register_driver(driver);
return driver;
}
static void mtd_debug_exit_tty_driver(struct tty_driver *driver)
{
tty_unregister_driver(driver);
put_tty_driver(driver);
}
static int __init mtd_debug_init(void)
{
dev_t dev;
int ret;
dev = MKDEV(0, 0);
ret = register_chrdev_region(dev, 1, "mtd_debug");
if (ret) {
printk(KERN_ERR "mtd_debug: failed to register chrdev region\n");
return ret;
}
mtd_debug_tty_driver = mtd_debug_init_tty_driver();
if (!mtd_debug_tty_driver) {
printk(KERN_ERR "mtd_debug: failed to init tty driver\n");
unregister_chrdev_region(dev, 1);
return -ENOMEM;
}
cdev_init(&mtd_debug_tty_driver->cdev, &mtd_debug_fops);
mtd_debug_tty_driver->cdev.owner = THIS_MODULE;
ret = cdev_add(&mtd_debug_tty_driver->cdev, dev, 1);
if (ret) {
printk(KERN_ERR "mtd_debug: failed to add cdev\n");
mtd_debug_exit_tty_driver(mtd_debug_tty_driver);
unregister_chrdev_region(dev, 1);
return ret;
}
printk(KERN_INFO "mtd_debug: tty driver registered\n");
return 0;
}
static void __exit mtd_debug_exit(void)
{
dev_t dev;
dev = MKDEV(0, 0);
cdev_del(&mtd_debug_tty_driver->cdev);
mtd_debug_exit_tty_driver(mtd_debug_tty_driver);
unregister_chrdev_region(dev, 1);
printk(KERN_INFO "mtd_debug: tty driver unregistered\n");
}
module_init(mtd_debug_init);
module_exit(mtd_debug_exit);
MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("MTD debug console");
MODULE_LICENSE("GPL");
```
该代码定义了一个字符设备,用于在调试MTD驱动时,查看和修改MTD缓冲区中的数据。同时,该代码还定义了一个 tty 驱动,将缓冲区中的数据输出到终端。用户可以通过在终端中输入和输出数据,对 MTd 缓冲区进行读写,从而进行调试。
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![7z](https://img-home.csdnimg.cn/images/20210720083312.png)
![application/x-rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![txt](https://img-home.csdnimg.cn/images/20210720083642.png)
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![docx](https://img-home.csdnimg.cn/images/20210720083331.png)