ht66f2390使用esp8266发送数据的代码

] == color && board[i][j+3] == EMPTY && board[i][j+4] == EMPTY) {
count++;
以下是使用 ESP8266 模块发送数据到服务器的 HT66F2390 代码示例：

#include <ht }
    }
    // 正斜线
    for (i = x - 4, j = y - 4; i <= x66f2390.h>
#include <stdio.h>
#include <string.h>

// 定义 ESP8266 模块的 SSID 和密码, j <= y; i++, j++) {
        if (i < 0 || i + 4 >= BOARD_SIZE || j < 
#define WIFI_SSID "your_wifi_ssid"
#define WIFI_PASSWORD "your_wifi_password"

// 定义服务器地址和端口号
0 || j + 4 >= BOARD_SIZE) {
            continue;
        }
        if (board[i][j] == EMPTY && board[i#define SERVER_ADDR "your_server_address"
#define SERVER_PORT 80

// 定义发送的数据
#define DATA "Hello, world!"

//+1][j+1] == color && board[i+2][j+2] == color && board[i+3][j+ 定义串口通信相关参数
#define BAUD_RATE 9600
#define XTAL_FREQ 8000000

void uart_init3] == EMPTY && board[i+4][j+4] == EMPTY) {
            count++;
        }
    }
    // 反斜() {
    // 设置波特率
    UINT16 baud_rate_div = XTAL_FREQ / (16 * BAUD_RATE) - 线
    for (i = x + 4, j = y - 4; i >= x, j <= y; i--,1;
    SC0BRH = (baud_rate_div >> 8) & 0xFF;
    SC0BRL = baud j++) {
        if (i + 4 >= BOARD_SIZE || i < 0 || j < 0 || j + 4 >=_rate_div & 0xFF;

    // 使能接收和发送
    SC0CR1 = 0x00;
    BOARD_SIZE) {
            continue;
        }
        if (board[i][j] == EMPTY && board[i-1][j+1] SC0CR2 = 0x0C;
}

void esp_send(const char *data) {
    // 连接 WiFi
    printf == color && board[i-2][j+2] == color && board[i-3][j+3] == EMPTY && board[i("AT+CWMODE=1\r\n");
    printf("AT+CWJAP=\"%s\",\"%s\"\r\n", WIFI_S-4][j+4] == EMPTY) {
            count++;
        }
    }
    return (count >= 2);
}

// 判断SID, WIFI_PASSWORD);

    // 等待连接成功
    char buffer[128];
    do {
        fgets(buffer, 128, stdin是否双三
int is_double_three(int x, int y, int color) {
    int i, j;
    int count = );
    } while (strncmp(buffer, "WIFI CONNECTED", 14) != 0);

    // 连接服务器并发送数据0;
    // 横向
    for (i = x - 3, j = y; i <= x; i++) {
       
    printf("AT+CIPSTART=\"TCP\",\"%s\",%d\r\n", SERVER_ADDR, SERVER_PORT);
    printf("AT if (i < 0 || i + 3 >= BOARD_SIZE) {
            continue;
        }
        if (board[i][j]+CIPSEND=%d\r\n", strlen(data));
    printf("%s\r\n", data);
    printf("AT+CIPCLOSE\r\n == EMPTY && board[i+1][j] == color && board[i+2][j] == color && board[i+3][j");
}

int main() {
    // 初始化串口
    uart_init();

    // 发送数据
    esp_send(DATA);

    return] == EMPTY) {
            count++;
        }
    }
    // 竖向
    for (i = x, j = y -  0;
}

请根据实际情况修改代码中的 WiFi SSID、密码、服务器地址、端口号和发送的数据等参数。