用c 语言写一段iic 作为从机
时间: 2024-02-09 07:08:10 浏览: 29
以下是一个简单的用C语言实现的I2C从机程序:
```
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/ioctl.h>
#include <linux/i2c-dev.h>
#define I2C_SLAVE_ADDR 0x50 // 从机地址
int i2c_fd = -1;
int main(int argc, char *argv[]) {
uint8_t read_buf[256] = {0};
uint8_t write_buf[256] = {0};
int ret = 0;
int i;
// 打开I2C总线设备
i2c_fd = open("/dev/i2c-1", O_RDWR);
if (i2c_fd == -1) {
printf("Open i2c device failed.\n");
return -1;
}
// 设置从机地址
ioctl(i2c_fd, I2C_SLAVE, I2C_SLAVE_ADDR);
// 读取数据
ret = read(i2c_fd, read_buf, 256);
if (ret == -1) {
printf("Read data failed.\n");
return -1;
}
printf("Read data: ");
for (i = 0; i < ret; i++) {
printf("%02x ", read_buf[i]);
}
printf("\n");
// 写入数据
for (i = 0; i < 256; i++) {
write_buf[i] = i;
}
ret = write(i2c_fd, write_buf, 256);
if (ret == -1) {
printf("Write data failed.\n");
return -1;
}
printf("Write data: ");
for (i = 0; i < ret; i++) {
printf("%02x ", write_buf[i]);
}
printf("\n");
// 关闭I2C总线设备
close(i2c_fd);
return 0;
}
```
以上代码中,先使用open()函数打开I2C总线设备,然后使用ioctl()函数将从机地址设置为0x50。接着使用read()函数读取从机发送的数据,并使用write()函数向从机写入数据。最后使用close()函数关闭I2C总线设备。请注意:此代码仅作为示例,实际应用中需要根据具体从机协议进行修改。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)