向OLED写入0xB0
时间: 2024-06-14 17:07:41 浏览: 4
根据提供的引用内容,向OLED写入0xB0的具体步骤如下:
1. 初始化OLED模块:根据引用[1]中的描述,首先需要对OLED相关寄存器进行初始化,以启动OLED的显示。
2. 通过函数将字符和数字显示到OLED模块上:根据引用中的描述,设计一个程序,将要显示的字符送到OLED模块。
具体的代码示例如下:
```c
// 初始化OLED模块
void OLED_Init() {
// 对OLED相关寄存器进行初始化
// ...
}
// 向OLED写入0xB0
void OLED_Write(uint8_t data) {
// 将数据写入OLED模块
// ...
}
// 主函数
int main() {
// 初始化OLED模块
OLED_Init();
// 向OLED写入0xB0
OLED_Write(0xB0);
return 0;
}
```
请注意,以上代码示例是基于STM32的C语言代码,具体的实现可能会因为硬件平台和开发环境的不同而有所差异。请根据实际情况进行相应的修改和调整。
相关问题
8051驱动OLED
根据提供的引用内容,我们可以了解到8051单片机驱动OLED的方法。下面是一个简单的步骤:
1. 确定OLED的型号和接口类型,例如本例中使用的是SSD1303和IIC接口的0.96寸OLED。
2. 连接OLED到8051单片机,根据OLED的接口类型选择相应的连接方式。
3. 初始化OLED,包括设置显示模式、清屏等操作。具体的初始化方法可以参考OLED的数据手册。
4. 将需要显示的内容写入OLED的缓存区,然后刷新OLED即可显示内容。
下面是一个简单的8051单片机驱动OLED的代码示例,假设使用的是IIC接口的0.96寸OLED:
```c
#include <reg52.h>
#include <intrins.h>
#define SCL P1_0
#define SDA P1_1
void delay(unsigned int t)
{
while(t--);
}
void IIC_Start()
{
SDA = 1;
SCL = 1;
_nop_();
_nop_();
_nop_();
SDA = 0;
_nop_();
_nop_();
_nop_();
SCL = 0;
}
void IIC_Stop()
{
SDA = 0;
SCL = 1;
_nop_();
_nop_();
_nop_();
SDA = 1;
_nop_();
_nop_();
_nop_();
}
void IIC_SendByte(unsigned char dat)
{
unsigned char i;
for(i=0; i<8; i++)
{
SDA = dat & 0x80;
SCL = 1;
_nop_();
_nop_();
_nop_();
SCL = 0;
dat <<= 1;
}
}
void OLED_Init()
{
IIC_Start();
IIC_SendByte(0x78);
IIC_SendByte(0x00);
IIC_SendByte(0xAE);
IIC_SendByte(0xD5);
IIC_SendByte(0x80);
IIC_SendByte(0xA8);
IIC_SendByte(0x3F);
IIC_SendByte(0xD3);
IIC_SendByte(0x00);
IIC_SendByte(0x40);
IIC_SendByte(0x8D);
IIC_SendByte(0x14);
IIC_SendByte(0x20);
IIC_SendByte(0x00);
IIC_SendByte(0xA1);
IIC_SendByte(0xC8);
IIC_SendByte(0xDA);
IIC_SendByte(0x12);
IIC_SendByte(0x81);
IIC_SendByte(0xCF);
IIC_SendByte(0xD9);
IIC_SendByte(0xF1);
IIC_SendByte(0xDB);
IIC_SendByte(0x40);
IIC_SendByte(0xA4);
IIC_SendByte(0xA6);
IIC_SendByte(0xAF);
IIC_Stop();
}
void OLED_Clear()
{
unsigned char i, j;
for(i=0; i<8; i++)
{
IIC_Start();
IIC_SendByte(0x78);
IIC_SendByte(0x00);
IIC_SendByte(0xB0+i);
IIC_SendByte(0x00);
IIC_SendByte(0x10);
IIC_SendByte(0x00);
IIC_SendByte(0xFF);
IIC_Stop();
}
}
void OLED_ShowChar(unsigned char x, unsigned char y, unsigned char chr)
{
unsigned char c = 0, i = 0;
c = chr - ' ';
if(x > 127)
{
x = 0;
y++;
}
IIC_Start();
IIC_SendByte(0x78);
IIC_SendByte(0x00);
IIC_SendByte(0xB0+y);
IIC_SendByte(((x&0xF0)>>4)|0x10);
IIC_SendByte((x&0x0F)|0x01);
for(i=0; i<8; i++)
{
IIC_SendByte(font[c][i]);
}
IIC_Stop();
}
void OLED_ShowString(unsigned char x, unsigned char y, unsigned char *str)
{
while(*str != '\0')
{
OLED_ShowChar(x, y, *str);
x += 8;
str++;
}
}
void main()
{
OLED_Init();
OLED_Clear();
OLED_ShowString(0, 0, "Hello, world!");
while(1);
}
```
oled怎么显示图案stm32
OLED屏幕可以通过STM32的I2C或SPI接口来控制。一般来说,显示图案的步骤如下:
1. 初始化OLED屏幕。这包括向OLED发送初始化命令并设置显示区域等。
2. 将要显示的图案数据转换为OLED屏幕所需的格式。一般情况下,需要将图案数据转换为字节流,并按照屏幕的显示区域进行排列。
3. 将转换后的图案数据写入OLED屏幕的缓存区。
4. 刷新OLED屏幕,将缓存区的内容显示出来。
以下是一个使用STM32和OLED屏幕显示图案的示例代码:
```
#include "stm32f4xx.h"
#include "stm32f4xx_gpio.h"
#include "stm32f4xx_i2c.h"
#define OLED_ADDRESS 0x78
#define OLED_WIDTH 128
#define OLED_HEIGHT 64
uint8_t oled_buffer[1024];
void oled_init(void)
{
// Send initialization commands to OLED
// ...
// Set display area to full screen
uint8_t cmd[] = {0x00, 0x10, 0xB0, 0x00, 0xFF, 0x21, 0x00, 0x7F, 0x22, 0x00, 0x07};
HAL_I2C_Master_Transmit(&hi2c1, OLED_ADDRESS, cmd, sizeof(cmd), HAL_MAX_DELAY);
// Clear buffer
memset(oled_buffer, 0x00, sizeof(oled_buffer));
}
void oled_draw_pixel(int x, int y)
{
if (x < 0 || x >= OLED_WIDTH || y < 0 || y >= OLED_HEIGHT) {
return;
}
int index = (y / 8) * OLED_WIDTH + x;
uint8_t bit = 1 << (y % 8);
oled_buffer[index] |= bit;
}
void oled_draw_bitmap(const uint8_t *bitmap)
{
for (int y = 0; y < OLED_HEIGHT; y++) {
for (int x = 0; x < OLED_WIDTH; x++) {
if (*bitmap++ != 0) {
oled_draw_pixel(x, y);
}
}
}
}
void oled_flush(void)
{
uint8_t data[17];
data = 0x40;
for (int i = 0; i < OLED_HEIGHT / 8; i++) {
data = 0xB0 + i;
data = 0x00;
data = 0x10;
memcpy(&data, &oled_buffer[i * OLED_WIDTH], OLED_WIDTH);
HAL_I2C_Master_Transmit(&hi2c1, OLED_ADDRESS, data, sizeof(data), HAL_MAX_DELAY);
}
}
int main(void)
{
HAL_Init();
// Initialize I2C and GPIO pins for OLED
// ...
oled_init();
// Draw bitmap on screen
oled_draw_bitmap(bitmap_data);
// Flush buffer to screen
oled_flush();
while(1) {
// ...
}
}
```
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)