hx8357d初始化代码
时间: 2023-09-22 14:01:55 浏览: 56
HX8357D是一款液晶显示器控制器芯片,为了正常使用这款芯片,需要进行初始化设置。下面是关于HX8357D的初始化代码:
首先,将芯片的片选引脚设置为输出模式,并将其拉低。接下来,设置SPI通信接口的模式并进行初始化配置,包括设置时钟速度、字节位序等。然后,设置数据/命令选择引脚为输出模式,并且将其拉低以选择命令模式。接下来,调用RESET()函数,对HX8357D进行硬复位操作。
接下来,开始对HX8357D进行寄存器的初始化配置。首先设置电源控制,包括设置电压范围、电流控制等参数。然后进行Gamma校正设置,通过调整Gamma曲线可以提高显示效果。接下来,设置背光亮度和对比度的调整,以及屏幕的旋转方向等。最后,设置显示模式为正常显示。
以上就是关于HX8357D初始化代码的简单描述。当然,实际上初始化代码可能还需要其他的一些参数配置,具体的设置方法可以参考该芯片的数据手册或者相关资料。
相关问题
esp32 hx711 idf完整代码
以下是使用ESP32和HX711传感器实现称重功能的完整代码,使用ESP-IDF开发。
```c
#include <stdio.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/gpio.h"
#include "driver/adc.h"
#include "driver/dac.h"
#include "driver/i2c.h"
#define HX711_DATA_PIN 23
#define HX711_CLOCK_PIN 22
void hx711_init() {
gpio_pad_select_gpio(HX711_CLOCK_PIN);
gpio_set_direction(HX711_CLOCK_PIN, GPIO_MODE_OUTPUT);
gpio_pad_select_gpio(HX711_DATA_PIN);
gpio_set_direction(HX711_DATA_PIN, GPIO_MODE_INPUT);
gpio_set_pull_mode(HX711_DATA_PIN, GPIO_PULLUP_ONLY);
}
int hx711_read() {
while (gpio_get_level(HX711_DATA_PIN) != 0) {
vTaskDelay(1 / portTICK_PERIOD_MS);
}
int value = 0;
for (int i = 0; i < 24; i++) {
gpio_set_level(HX711_CLOCK_PIN, 1);
vTaskDelay(1 / portTICK_PERIOD_MS);
value = value << 1;
gpio_set_level(HX711_CLOCK_PIN, 0);
vTaskDelay(1 / portTICK_PERIOD_MS);
if (gpio_get_level(HX711_DATA_PIN) == 1) {
value++;
}
}
gpio_set_level(HX711_CLOCK_PIN, 1);
vTaskDelay(1 / portTICK_PERIOD_MS);
gpio_set_level(HX711_CLOCK_PIN, 0);
vTaskDelay(1 / portTICK_PERIOD_MS);
return value ^ 0x800000;
}
void app_main() {
hx711_init();
while (1) {
int value = hx711_read();
printf("Weight: %d g\n", value);
vTaskDelay(1000 / portTICK_PERIOD_MS);
}
}
```
该代码使用GPIO23作为HX711数据引脚,GPIO22作为HX711时钟引脚。在 `hx711_init()` 函数中进行引脚初始化。 `hx711_read()` 函数实现了从HX711读取24位数据的过程。在主函数中,使用该函数读取称重值,并将其打印到终端。
hx711在龙芯1c中代码
HX711是一种用于称重传感器的模拟数字转换芯片,它的工作电压为2.7V至5V,具有高精度、可编程增益和低噪声等特点。在龙芯1C中,可以通过GPIO口和SPI总线来控制HX711芯片。
以下是HX711在龙芯1C中的代码示例:
```c
#include <stdio.h>
#include <stdint.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <linux/spi/spidev.h>
#define SPI_DEVICE "/dev/spidev0.0" // SPI设备节点
#define SPI_MODE SPI_MODE_0 // SPI模式
#define SPI_BITS 8 // SPI数据位数
#define SPI_SPEED 1000000 // SPI时钟速度
#define GPIO_DATA 0x01 // 数据引脚
#define GPIO_SCLK 0x02 // 时钟引脚
static int spi_fd;
// 初始化SPI总线
int spi_init(void)
{
spi_fd = open(SPI_DEVICE, O_RDWR);
if (spi_fd < 0) {
perror("open");
return -1;
}
uint8_t mode = SPI_MODE;
if (ioctl(spi_fd, SPI_IOC_WR_MODE, &mode) < 0) {
perror("ioctl");
return -1;
}
uint8_t bits = SPI_BITS;
if (ioctl(spi_fd, SPI_IOC_WR_BITS_PER_WORD, &bits) < 0) {
perror("ioctl");
return -1;
}
uint32_t speed = SPI_SPEED;
if (ioctl(spi_fd, SPI_IOC_WR_MAX_SPEED_HZ, &speed) < 0) {
perror("ioctl");
return -1;
}
return 0;
}
// 读取HX711芯片的数据
int32_t hx711_read(void)
{
uint32_t value = 0;
uint8_t buf[3] = {0};
// 发送24个时钟脉冲,并读取24位数据
for (int i = 0; i < 24; i++) {
// 拉低时钟脉冲
buf[0] = GPIO_DATA;
buf[1] = 0;
if (write(spi_fd, buf, 2) < 0) {
perror("write");
return -1;
}
// 读取数据引脚状态
buf[0] = GPIO_DATA;
if (read(spi_fd, buf, 1) < 0) {
perror("read");
return -1;
}
// 将读取到的数据移位并累加
value <<= 1;
value |= buf[0] & 0x01;
// 拉高时钟脉冲
buf[0] = GPIO_DATA;
buf[1] = GPIO_SCLK;
if (write(spi_fd, buf, 2) < 0) {
perror("write");
return -1;
}
}
// 判断正负数并计算补码
if (value & 0x800000) {
value |= 0xff000000;
}
// 读取校准值并计算实际重量
int32_t offset = -8388608; // 校准值
int32_t weight = value + offset;
return weight;
}
int main(void)
{
if (spi_init() < 0) {
return -1;
}
while (1) {
int32_t weight = hx711_read();
printf("weight: %d\n", weight);
sleep(1);
}
return 0;
}
```
上述代码中,`spi_init()`函数用于初始化SPI总线,`hx711_read()`函数用于读取HX711芯片的数据。在读取数据过程中,先发送24个时钟脉冲,并读取24位数据,然后判断正负数并计算补码,最后读取校准值并计算实际重量。在主函数中,不断调用`hx711_read()`函数读取数据并输出。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)