串口助手没法显示unsigned char
时间: 2024-03-09 20:42:13 浏览: 32
串口助手通常用于串口通信,它可以接收和发送数据。当使用串口助手显示unsigned char类型的数据时,可能会遇到一些问题。
首先,unsigned char是一种无符号字符类型,它的取值范围是0到255。在显示unsigned char类型的数据时,串口助手可能默认将其解析为ASCII字符,而不是直接显示数值。
为了正确显示unsigned char类型的数据,你可以尝试以下几种方法:
1. 将unsigned char类型的数据转换为字符串:你可以使用sprintf函数将unsigned char类型的数据转换为字符串,然后通过串口助手发送字符串数据。
2. 将unsigned char类型的数据转换为十六进制格式:你可以使用printf函数的格式化输出功能,将unsigned char类型的数据以十六进制格式输出,然后通过串口助手发送十六进制数据。
3. 使用其他支持显示二进制数据的串口助手:有些串口助手软件支持显示二进制数据,你可以尝试使用这些软件来显示unsigned char类型的数据。
希望以上方法能够帮助你解决问题!
相关问题
树莓派 串口 发送多个 unsigned char
要通过串口发送多个 unsigned char,可以按照以下步骤进行:
1. 打开串口设备文件
在树莓派中,通常是通过/dev/ttyXX来访问串口设备的,其中XX表示串口编号。打开串口设备文件可以使用open函数,例如:
```
int fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY);
```
其中,O_RDWR表示以读写方式打开串口设备文件,O_NOCTTY表示不将串口设备设置为控制终端。
2. 配置串口参数
在发送数据之前,需要配置一些串口参数,例如波特率、数据位、停止位、校验位等。可以使用termios库中的函数进行配置,例如:
```
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B115200);
cfsetospeed(&options, B115200);
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~PARENB;
tcsetattr(fd, TCSANOW, &options);
```
其中,设置波特率为115200,数据位为8位,停止位为1位,无校验位。这里使用的是c_cflag选项,其他选项的含义可以参考文档。
3. 发送数据
在配置完串口参数后,就可以通过write函数向串口发送数据:
```
unsigned char data[] = {0x11, 0x22, 0x33};
write(fd, data, sizeof(data));
```
其中,data数组是待发送的数据,sizeof(data)表示数据的长度。
4. 关闭串口
在使用完串口之后,需要将其关闭:
```
close(fd);
```
完整代码示例:
```
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
int main(void)
{
int fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY);
if (fd < 0) {
perror("open");
exit(1);
}
struct termios options;
tcgetattr(fd, &options);
cfsetispeed(&options, B115200);
cfsetospeed(&options, B115200);
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~CSTOPB;
options.c_cflag &= ~PARENB;
tcsetattr(fd, TCSANOW, &options);
unsigned char data[] = {0x11, 0x22, 0x33};
write(fd, data, sizeof(data));
close(fd);
return 0;
}
```
树莓派 串口发送 unsigned char
可以通过使用wiringPi库的serialWrite函数来发送unsigned char。
首先,需要安装wiringPi库。可以在终端中输入以下命令来安装:
```
sudo apt-get update
sudo apt-get install wiringpi
```
然后,在代码中包含wiringPi库的头文件:
```c++
#include <wiringPi.h>
```
接下来,需要打开串口并设置波特率。假设串口的设备文件为/dev/ttyS0,波特率为9600,则可以使用以下代码:
```c++
int serial = serialOpen("/dev/ttyS0", 9600);
```
最后,使用serialWrite函数发送unsigned char。例如,发送值为0x01的unsigned char:
```c++
unsigned char data = 0x01;
serialWrite(serial, data);
```
完整的代码示例:
```c++
#include <wiringPi.h>
int main()
{
// 打开串口
int serial = serialOpen("/dev/ttyS0", 9600);
// 发送unsigned char
unsigned char data = 0x01;
serialWrite(serial, data);
// 关闭串口
serialClose(serial);
return 0;
}
```
相关推荐
![zip](https://img-home.csdnimg.cn/images/20210720083736.png)
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![jar](https://img-home.csdnimg.cn/images/20210720083455.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)