tmp102温度读取程序
时间: 2023-08-16 13:08:39 浏览: 85
以下是使用Python编写的tmp102温度读取程序:
```python
import smbus
import time
# Define the address of the TMP102 temperature sensor
TMP102_ADDR = 0x48
# Define the register addresses of the TMP102 temperature sensor
TMP102_TEMP_REG = 0x00
TMP102_CONF_REG = 0x01
# Initialize the I2C bus
bus = smbus.SMBus(1)
# Set the configuration register to the default value (12-bit resolution, continuous conversion mode)
bus.write_byte_data(TMP102_ADDR, TMP102_CONF_REG, 0x60)
# Read the temperature data from the temperature register and convert it to Celsius
def read_temperature():
temp_data = bus.read_word_data(TMP102_ADDR, TMP102_TEMP_REG)
temp_data = ((temp_data << 8) & 0xFF00) + (temp_data >> 8)
temperature = temp_data * 0.0625
return temperature
# Continuously read and print the temperature data
while True:
temperature = read_temperature()
print("Temperature: %.2f C" % temperature)
time.sleep(1)
```
这个程序使用Python的smbus库来与TMP102温度传感器进行通信。它首先初始化I2C总线,然后将配置寄存器设置为默认值(12位分辨率,连续转换模式)。然后,它定义了一个函数来读取温度数据并将其转换为摄氏度。最后,它使用一个无限循环来连续读取和打印温度数据。
相关推荐
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)