SD I/O interrupt received interrupt
时间: 2023-12-31 16:06:34 浏览: 20
A Secure Digital (SD) Input/Output (I/O) interrupt is a signal that is generated by an SD card when it needs to communicate with the host device. This interrupt can be triggered by various events, such as when a command is completed or when an error occurs.
When the host device receives the SD I/O interrupt, it stops its current operation and responds to the SD card's request. This allows the SD card to send or receive data, update its status, or perform other tasks.
In summary, an SD I/O interrupt is an important mechanism that enables communication between an SD card and a host device. It ensures that data transfers and other operations are synchronized and completed successfully.
相关问题
I/O接口访问控制的方式有哪些
I/O接口访问控制的方式主要有以下几种:
1. 内存映射I/O (Memory Mapped I/O):将设备I/O寄存器经地址编码与内存地址有一个映射关系,通过对特定内存地址的读/写操作来完成对设备I/O寄存器的访问。
2. 端口I/O (Port Mapped I/O):将设备I/O寄存器与CPU数据总线中的端口寄存器相连接,通过CPU指定读/写端口寄存器的地址来完成对设备I/O寄存器的访问。
3. 中断控制I/O (Interrupt Driven I/O):设备完成一次I/O操作后,向CPU发出中断信号,CPU在中断处理程序中完成对设备I/O寄存器的访问。
4. DMA控制I/O (Direct Memory Access I/O):设备通过DMA控制器直接访问内存,将数据传输到/从设备I/O寄存器中,无需CPU参与。
37个通用I/O口包括什么
通用I/O(GPIO)是一种数字输入/输出端口,可以通过软件进行控制和读取。这些GPIO通常包括以下功能:
1. 数字输入(Digital Input):可以读取高电平或低电平的数字信号。
2. 数字输出(Digital Output):可以输出高电平或低电平的数字信号。
3. 模拟输入(Analog Input):可以读取模拟信号,如电压或电流。
4. 模拟输出(Analog Output):可以输出模拟信号,如电压或电流。
5. 中断输入(Interrupt Input):可以检测输入信号的变化,并在发生变化时唤醒处理器。
6. PWM输出(PWM Output):可以生成脉冲宽度调制(PWM)信号,用于控制电机或LED等设备。
7. 串行通信(Serial Communication):可以进行串行通信,如UART、SPI和I2C等。
8. 定时器(Timer):可以生成定时器中断,用于实现定时功能。
具体的GPIO功能和数量可能会因芯片型号和开发板而异。