定时器定时时间到时,通过连接在ADC1的通道16上的stm32F103内部温度传感器获取芯片内部的温度
时间: 2024-02-09 21:13:34 浏览: 27
好的,你的问题是如何在定时器定时时间到时,通过连接在ADC1的通道16上的stm32F103内部温度传感器获取芯片内部的温度。
首先,你需要在STM32F103的代码中配置ADC1的通道16以读取内部温度传感器的值。然后,你需要配置一个定时器来触发ADC转换并获取温度值。以下是一个简单的示例代码来实现这个功能:
```c
#include "stm32f10x.h"
uint16_t temperature = 0;
void ADC1_Configuration(void)
{
ADC_InitTypeDef ADC_InitStructure;
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_GPIOC, ENABLE);
/* Configure PC0 (ADC Channel16) as analog input -------------------------*/
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOC, &GPIO_InitStructure);
/* ADC1 configuration ------------------------------------------------------*/
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 1;
ADC_Init(ADC1, &ADC_InitStructure);
/* ADC1 regular channel16 configuration -----------------------------------*/
ADC_RegularChannelConfig(ADC1, ADC_Channel_16, 1, ADC_SampleTime_71Cycles5);
/* Enable ADC1 */
ADC_Cmd(ADC1, ENABLE);
}
void TIM_Configuration(void)
{
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
NVIC_InitTypeDef NVIC_InitStructure;
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
TIM_TimeBaseStructure.TIM_Period = 1000 - 1; // 1ms
TIM_TimeBaseStructure.TIM_Prescaler = 7200 - 1; // 10kHz
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
TIM_Cmd(TIM2, ENABLE);
}
int main(void)
{
ADC1_Configuration();
TIM_Configuration();
while (1)
{
// Do something else
}
}
void TIM2_IRQHandler(void)
{
if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET)
{
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
while (ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET);
temperature = ADC_GetConversionValue(ADC1) * 3300 / 4096;
temperature = (temperature - 760) / 25 + 25;
}
}
```
在这个例子中,我们使用TIM2定时器来触发ADC转换。定时器的时钟频率为10kHz,定时器周期为1ms。在TIM2的中断处理程序中,我们启动ADC转换,等待转换完成,并将温度值计算并存储在变量temperature中。
需要注意的是,计算温度值的公式可能需要根据芯片型号的不同进行调整。
希望这个例子能够帮助你解决你的问题。如果你有任何其他问题,请随时问我。
相关推荐
![](https://img-home.csdnimg.cn/images/20210720083646.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)