STM32F103RCT6对端口取反输出
时间: 2023-08-26 19:04:22 浏览: 132
要在STM32F103RCT6上实现对某个端口的取反输出,你可以使用GPIO库提供的功能来实现。首先,你需要初始化要使用的GPIO端口,并将其配置为输出模式。然后,你可以使用库中的函数来设置或清除端口的输出状态。
以下是一个简单的示例代码,演示如何对端口进行取反输出:
```c
#include "stm32f10x.h"
int main(void)
{
// 初始化GPIO端口
GPIO_InitTypeDef GPIO_InitStructure;
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); // 使能GPIOA时钟
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; // 设置要使用的引脚
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; // 设置为推挽输出模式
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; // 设置输出速度
GPIO_Init(GPIOA, &GPIO_InitStructure); // 初始化GPIOA端口
// 循环中反转端口状态
while (1)
{
GPIO_WriteBit(GPIOA, GPIO_Pin_0, (BitAction)(1 - GPIO_ReadOutputDataBit(GPIOA, GPIO_Pin_0)));
Delay(500); // 延时500ms
}
}
```
请注意,以上示例代码中的`Delay`函数需要根据你的实际环境进行定义和实现,以提供适当的延时功能。
你可以根据自己的需求修改示例代码中的GPIO端口和引脚,以及延时时间。希望这可以帮助到你!
相关推荐
![pdf](https://img-home.csdnimg.cn/images/20210720083512.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)