stm32 nrf24l01配置具体代码

以下是一个简单的 STM32 和 NRF24L01 的配置代码示例：

#include "stm32f10x.h"
#include "nrf24l01.h"

int main(void)
{
// 初始化 STM32 的 GPIO 和 SPI 接口
GPIO_InitTypeDef GPIO_InitStructure;
SPI_InitTypeDef SPI_InitStructure;

RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_SPI1, ENABLE);

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 | GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);

GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);

SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
SPI_Init(SPI1, &SPI_InitStructure);

SPI_Cmd(SPI1, ENABLE);

// 初始化 NRF24L01
nrf24l01_init();

// 设置 NRF24L01 的地址和频道
nrf24l01_set_rx_addr((uint8_t *)"12345", 5);
nrf24l01_set_tx_addr((uint8_t *)"12345", 5);
nrf24l01_set_channel(10);

while (1)
{
// 发送数据
uint8_t data[] = {x01, x02, x03, x04, x05};
nrf24l01_send(data, sizeof(data));

// 接收数据
uint8_t buf[32];
if (nrf24l01_recv(buf, sizeof(buf)))
{
// 处理接收到的数据
}
}
}