stm32按键控制流水灯
时间: 2023-09-10 20:10:36 浏览: 34
以下是用stm32控制流水灯的示例代码:
```c
#include "stm32f10x.h"
GPIO_InitTypeDef GPIO_InitStructure;
int main(void)
{
uint16_t led = GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; // LED引脚
// 使能GPIOC和AFIO时钟
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO, ENABLE);
// 配置引脚为推挽输出
GPIO_InitStructure.GPIO_Pin = led;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_Init(GPIOC, &GPIO_InitStructure);
// 配置按键引脚为输入,下拉
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IPD;
GPIO_Init(GPIOA, &GPIO_InitStructure);
while (1)
{
if (GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0) == 0) // 检测按键是否按下
{
GPIO_SetBits(GPIOC, led); // 点亮LED
delay(200); // 延时
GPIO_ResetBits(GPIOC, led); // 熄灭LED
delay(200); // 延时
}
}
}
void delay(uint32_t count)
{
uint32_t i;
for (i = 0; i < count; i++);
}
```
在这个示例代码中,我们使用了GPIOC的4个引脚控制LED,并使用GPIOA的一个引脚作为按键输入。在主循环中,我们检测按键是否按下,如果按下就点亮LED并延时一段时间后熄灭LED。如果按键没有按下,程序会一直循环等待。
需要注意的是,该示例代码中我们使用了一个自定义的延时函数`delay()`,需要自行实现。另外,如果需要使用其他引脚控制LED和按键,需要修改相应的引脚编号和配置。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)