mlx90614 Python程序
时间: 2023-03-20 16:00:30 浏览: 88
mlx90614是一款测量物体温度的红外线传感器,可以通过Python程序进行控制和读取数据。
要使用Python程序读取mlx90614的数据,需要先安装适当的Python库。可以使用pip命令安装Adafruit CircuitPython库:
```
pip install adafruit-circuitpython-mlx90614
```
安装完成后,可以使用以下示例代码读取mlx90614传感器的数据:
```python
import board
import busio
import adafruit_mlx90614
# 初始化I2C总线
i2c = busio.I2C(board.SCL, board.SDA)
# 创建mlx90614传感器对象
mlx = adafruit_mlx90614.MLX90614(i2c)
# 读取物体温度
object_temp = mlx.object_temperature
# 读取环境温度
ambient_temp = mlx.ambient_temperature
print("Object temperature: ", object_temp)
print("Ambient temperature: ", ambient_temp)
```
该程序首先初始化I2C总线,然后创建一个MLX90614对象,最后读取物体温度和环境温度,并将其打印到控制台上。
相关问题
mlx90614的python程序
以下是 mlx90614 的 Python 程序示例:
```python
import smbus
import time
# MLX90614 default address
MLX90614_I2C_ADDR = x5A
# MLX90614 registers
MLX90614_TA = x06
MLX90614_TOBJ1 = x07
MLX90614_TOBJ2 = x08
# SMBus object
bus = smbus.SMBus(1)
def read_temp(reg):
# Read two bytes from the specified register
raw = bus.read_word_data(MLX90614_I2C_ADDR, reg)
# Convert the raw data to temperature in Celsius
temp = (raw * .02) - 273.15
return temp
while True:
# Read ambient temperature
ta = read_temp(MLX90614_TA)
# Read object temperature 1
tobj1 = read_temp(MLX90614_TOBJ1)
# Read object temperature 2
tobj2 = read_temp(MLX90614_TOBJ2)
# Print the temperatures
print("Ambient temperature: {:.2f} C".format(ta))
print("Object temperature 1: {:.2f} C".format(tobj1))
print("Object temperature 2: {:.2f} C".format(tobj2))
# Wait for 1 second
time.sleep(1)
```
希望能对您有所帮助。
mlx90614读取温度的Python程序
以下是使用 Python 读取 MLX90614 温度传感器数据的示例程序:
```python
import smbus
import time
# MLX90614 的 I2C 地址
MLX90614_I2C_ADDR = 0x5A
# MLX90614 温度寄存器地址
MLX90614_TEMP_REG_ADDR = 0x07
# I2C 总线
bus = smbus.SMBus(1)
def read_temperature():
try:
# 读取 16 位温度数据
temp_data = bus.read_i2c_block_data(MLX90614_I2C_ADDR, MLX90614_TEMP_REG_ADDR, 2)
# 将获取的温度数据转换为实际温度值
temp_data.reverse()
temp_hex = ''.join(format(x, '02x') for x in temp_data)
temp = int(temp_hex, 16) * 0.02 - 273.15
return temp
except Exception as e:
print('Error:', e)
return None
# 循环读取温度并输出
while True:
temp = read_temperature()
if temp:
print('Temperature:', temp, '°C')
time.sleep(1)
```
说明:
- `smbus` 是 Python 中用于 I2C 通信的模块,需要先安装才能使用。
- MLX90614 的 I2C 地址为 0x5A(十进制为 90),温度寄存器地址为 0x07。
- 读取到的 16 位温度数据需要进行字节序转换,然后转换为实际温度值。
- 程序每秒读取一次温度并输出,可以根据实际需求进行调整。