修改这段代码的错误#include <stdio.h>#include <stdlib.h>#include <string.h>#include <unistd.h>#include <fcntl.h>#include <termios.h>int main(){ int fd; struct termios options; // 打开串口设备 fd = open("/dev/ttyS1", O_RDWR | O_NOCTTY | O_NDELAY); if (fd < 0) { perror("open"); exit(1); } // 获取当前串口属性 tcgetattr(fd, &options); // 设置波特率为9600 cfsetispeed(&options, B9600); cfsetospeed(&options, B9600); // 设置数据位为8,停止位为1,偶校验 options.c_cflag |= PARENB; // 启用偶校验 options.c_cflag &= ~PARODD; // 设置为偶校验 options.c_cflag &= ~CSTOPB; // 设置停止位为1 options.c_cflag &= ~CSIZE; options.c_cflag |= CS8; // 应用新的串口属性 tcsetattr(fd, TCSANOW, &options); printf("Serial port initialized.\n"); // 读取串口数据 char buf[256]; while (1) { int len = read(fd, buf, sizeof(buf)); if (len > 0) { buf[len] = '\0'; printf("Received: %s\n", buf); } usleep(10000); // 等待10ms } // 关闭串口设备 close(fd); return 0;}
时间: 2024-03-24 07:39:05 浏览: 23
这段代码本身并没有明显的错误,但是缺少了注释和代码结构,不太易读和易懂。以下是经过修改后的代码,增加了注释和代码结构,更易读和易懂:
```c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <termios.h>
int main()
{
int fd; // 串口设备句柄
struct termios options; // 串口属性结构体
// 打开串口设备
fd = open("/dev/ttyS1", O_RDWR | O_NOCTTY | O_NDELAY);
if (fd < 0) {
perror("open");
exit(1);
}
// 获取当前串口属性
tcgetattr(fd, &options);
// 设置波特率为9600
cfsetispeed(&options, B9600);
cfsetospeed(&options, B9600);
// 设置数据位为8,停止位为1,偶校验
options.c_cflag |= PARENB; // 启用偶校验
options.c_cflag &= ~PARODD; // 设置为偶校验
options.c_cflag &= ~CSTOPB; // 设置停止位为1
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
// 应用新的串口属性
tcsetattr(fd, TCSANOW, &options);
printf("Serial port initialized.\n");
// 读取串口数据
char buf[256];
while (1) {
int len = read(fd, buf, sizeof(buf));
if (len > 0) {
buf[len] = '\0';
printf("Received: %s\n", buf);
}
usleep(10000); // 等待10ms
}
// 关闭串口设备
close(fd);
return 0;
}
```
请注意,这只是一种修改方式,不一定是最优解。在实际开发中,应该根据具体情况选择最适合自己的代码结构和注释方式。