stm32实现软件spi
时间: 2023-09-05 08:10:08 浏览: 66
在STM32中,可以通过GPIO模拟SPI总线来实现软件SPI。
下面给出一个示例代码来实现软件SPI:
```c
#include "stm32f4xx.h"
#define SPI_SCK_PIN GPIO_Pin_5
#define SPI_SCK_GPIO_PORT GPIOA
#define SPI_SCK_GPIO_CLK RCC_AHB1Periph_GPIOA
#define SPI_MISO_PIN GPIO_Pin_6
#define SPI_MISO_GPIO_PORT GPIOA
#define SPI_MISO_GPIO_CLK RCC_AHB1Periph_GPIOA
#define SPI_MOSI_PIN GPIO_Pin_7
#define SPI_MOSI_GPIO_PORT GPIOA
#define SPI_MOSI_GPIO_CLK RCC_AHB1Periph_GPIOA
#define SPI_CS_PIN GPIO_Pin_2
#define SPI_CS_GPIO_PORT GPIOB
#define SPI_CS_GPIO_CLK RCC_AHB1Periph_GPIOB
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
RCC_AHB1PeriphClockCmd(SPI_SCK_GPIO_CLK | SPI_MISO_GPIO_CLK | SPI_MOSI_GPIO_CLK | SPI_CS_GPIO_CLK, ENABLE);
// SPI SCK pin configuration
GPIO_InitStructure.GPIO_Pin = SPI_SCK_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
// SPI MISO pin configuration
GPIO_InitStructure.GPIO_Pin = SPI_MISO_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
GPIO_Init(SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
// SPI MOSI pin configuration
GPIO_InitStructure.GPIO_Pin = SPI_MOSI_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
// SPI CS pin configuration
GPIO_InitStructure.GPIO_Pin = SPI_CS_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_OUT;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(SPI_CS_GPIO_PORT, &GPIO_InitStructure);
}
void SPI_Init(void)
{
// SPI configuration
}
uint8_t SPI_Transfer(uint8_t data)
{
uint8_t i;
uint8_t rx_data = 0;
// CS low
GPIO_ResetBits(SPI_CS_GPIO_PORT, SPI_CS_PIN);
// Send data MSB first
for(i = 0; i < 8; i++)
{
GPIO_ResetBits(SPI_SCK_GPIO_PORT, SPI_SCK_PIN);
if(data & 0x80)
{
GPIO_SetBits(SPI_MOSI_GPIO_PORT, SPI_MOSI_PIN);
}
else
{
GPIO_ResetBits(SPI_MOSI_GPIO_PORT, SPI_MOSI_PIN);
}
data <<= 1;
GPIO_SetBits(SPI_SCK_GPIO_PORT, SPI_SCK_PIN);
if(GPIO_ReadInputDataBit(SPI_MISO_GPIO_PORT, SPI_MISO_PIN))
{
rx_data |= 0x01;
}
rx_data <<= 1;
}
// CS high
GPIO_SetBits(SPI_CS_GPIO_PORT, SPI_CS_PIN);
return rx_data;
}
```
在上述代码中,我们首先定义了SPI总线的引脚,然后在`GPIO_Configuration()`函数中进行了GPIO的初始化配置,包括了SPI总线的时钟线、MISO线、MOSI线以及CS线。在`SPI_Transfer()`函数中,我们通过模拟SPI总线的时钟和数据线来进行数据的传输,其中通过读取MISO线的状态来获取从设备传回的数据。
相关推荐
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![rar](https://img-home.csdnimg.cn/images/20210720083606.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![-](https://csdnimg.cn/download_wenku/file_type_column_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)
![](https://csdnimg.cn/download_wenku/file_type_ask_c1.png)