linux中read函数的阻塞
时间: 2023-04-25 17:01:04 浏览: 132
在Linux中,read函数是一个阻塞函数。当调用read函数时,如果没有数据可读,程序会一直阻塞等待数据到来,直到有数据可读或者发生错误才会返回。这种阻塞方式可以保证程序在读取数据时不会浪费CPU资源,但也可能会导致程序在等待数据时出现卡死的情况。为了避免这种情况,可以使用非阻塞IO或者多线程等技术来处理读取数据的操作。
相关问题
linux 中read函数的作用
在 Linux 中,read 函数是用于从文件描述符中读取数据的系统调用。它的作用是从指定的文件描述符中读取数据,并将数据存储在指定的缓冲区中,直到读到指定的字节数或者遇到文件结束符为止。read 函数通常与 open、close、write 等函数一起使用,用于对文件的读写操作。
read 函数的原型如下:
```c
#include <unistd.h>
ssize_t read(int fd, void *buf, size_t count);
```
其中,fd 表示文件描述符,buf 表示存储数据的缓冲区指针,count 表示要读取的字节数。read 函数返回实际读取的字节数,如果出现错误,则返回 -1。在读取数据时,read 函数会阻塞进程,直到有数据可读或者发生错误为止。
linux读取串口数据read函数
在 Linux 中读取串口数据需要使用 read 函数,具体步骤如下:
1. 打开串口设备,可以使用 open 函数。
2. 配置串口,可以使用 tcsetattr 函数。
3. 循环读取串口数据,可以使用 read 函数,读取的数据将存储在缓冲区中。
4. 对读取的数据进行处理。
下面是一个简单的示例代码:
```
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <string.h>
#include <unistd.h>
#include <termios.h>
int main()
{
int fd; // 串口文件描述符
char buf[256]; // 缓冲区
int n; // 读取的字节数
// 打开串口设备
fd = open("/dev/ttyS0", O_RDWR | O_NOCTTY);
if (fd < 0) {
perror("open");
return -1;
}
// 配置串口
struct termios options;
tcgetattr(fd, &options);
options.c_cflag |= (CLOCAL | CREAD);
options.c_cflag &= ~CSIZE;
options.c_cflag |= CS8;
options.c_cflag &= ~PARENB;
options.c_cflag &= ~CSTOPB;
options.c_iflag &= ~(IXON | IXOFF | IXANY);
options.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
options.c_oflag &= ~OPOST;
options.c_cc[VTIME] = 0;
options.c_cc[VMIN] = 1;
tcsetattr(fd, TCSANOW, &options);
// 循环读取串口数据
while (1) {
memset(buf, '\0', sizeof(buf));
n = read(fd, buf, sizeof(buf));
if (n > 0) {
printf("read %d bytes: %s\n", n, buf);
}
}
// 关闭串口设备
close(fd);
return 0;
}
```
需要注意的是,在读取串口数据之前,需要先配置串口参数,具体参数根据实际情况而定。另外,在读取数据时,需要指定最大读取字节数,否则可能会一直阻塞在 read 函数上。