请用vhdl书写一个关于红外线传输的代码
时间: 2024-02-20 16:02:12 浏览: 60
以下是一个简单的 VHDL 代码示例,用于实现红外线传输功能。请注意,此代码仅供参考,具体实现可能因设备和需求而异。
```
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
entity ir_transmitter is
Port ( clk : in STD_LOGIC;
data_in : in STD_LOGIC_VECTOR (15 downto 0);
ir_out : out STD_LOGIC);
end ir_transmitter;
architecture Behavioral of ir_transmitter is
signal bit_cnt : integer range 0 to 15 := 0;
signal tx_data : std_logic_vector(15 downto 0) := (others => '0');
signal tx_rdy : std_logic := '0';
signal ir_state : integer range 0 to 2 := 0; -- 状态机状态
begin
-- 状态机
process (clk)
begin
if rising_edge(clk) then
case ir_state is
when 0 => -- 空闲状态
if tx_rdy = '1' then -- 数据已准备好
ir_out <= '0'; -- 发送起始位
bit_cnt <= 0; -- 计数器清零
tx_data <= data_in; -- 存储数据
ir_state <= 1; -- 进入发送状态
end if;
when 1 => -- 发送状态
if bit_cnt < 16 then
ir_out <= tx_data(bit_cnt); -- 发送数据位
bit_cnt <= bit_cnt + 1; -- 计数器加 1
else
ir_out <= '1'; -- 发送停止位
ir_state <= 2; -- 进入停止状态
end if;
when 2 => -- 停止状态
ir_out <= '1'; -- 发送停止位
tx_rdy <= '0'; -- 数据已发送完毕
ir_state <= 0; -- 进入空闲状态
end case;
end if;
end process;
-- 数据输入
process (data_in)
begin
tx_rdy <= '1'; -- 数据准备就绪
end process;
end Behavioral;
```
在上面的代码中,我们通过一个状态机来实现红外线传输功能。当收到数据输入信号时,我们将数据存储在一个寄存器中,然后通过状态机发送数据。在发送过程中,我们首先发送一位起始位,然后依次发送16位数据位和一位停止位。当数据发送完成后,我们将数据准备就绪标志位设为 '0',状态机进入空闲状态。在发送过程中,我们通过 ir_out 端口输出红外信号。
需要注意的是,这只是一个简单的示例代码,并没有考虑一些实际应用场景中的复杂情况。在实际应用中,您可能需要考虑红外信号的幅度、噪声等问题,并根据需要添加额外的逻辑。